Runcam Nano V3 HDZero camera is small and lightweight, making it ideal for whoops and micro drones. A sharp lens with very wide FOV offers the best nano camera image quality for HDZero yet.
The camera is optimized for 4:3 aspect ratio but can be configured for 16:9 aspect ratio within the camera’s settings menu. With its large FOV lens, 16:9 cut mode offers a comfortable amount of FOV and 16:9 full mode offers a very large FOV, but with vignetting.
Nano v3 is to replace Nano v2 and Nano lite camera.
Compared to Nano v2, Nano v3 offers:
Larger FOV (94° vs 89°)
Sharper optic
Reduced weight (half as heavy)
Compared to Nano lite, Nano v3 offers:
Larger FOV (94° vs 84°)
Sharper optic
Much clearer colors and contrast
Marginal weight increase (0.7g)
Specifications
Manufacturer:
RunCam
Model:
Nano V3 HDZero
Sensor Size:
1/2 inch
Resolution:
720@60fps 4:3
Sensitivity:
10650mV/Lux-sec
Shutter:
Rolling Shutter
FOV:
FOV D:155° H:126° V:94°
Input Power:
3.3V
Power Consumption:
0.5W
Weight:
2.2 g
Dimensions:
L14mm*W16mm*H14mm
Includes Nano V3 HDZero camera*1(MIPI cable Not included.)
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
had a few issues i used they ROBO 1002 and it fit fine without they carbon. but needs they carbon to hold battery had to use a mix of screws, had issues with props rubbing they frame with carbon using AZI props solved by not pressing props all the way down. I ordered they black and yellow, Black has a better mount for they antenna to keep in place !! yellow needs something to tie down
this gift would be nicer with a genuine properly welded whoop
Hello Franz,Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help. Thank you, NewBeeDrone Support
forgive waranty, buy an hot air soldering unit before !!!
Hello Franz,
Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help.