Nitro Nectar 18650 Li-Ion Cells for Goggle Batteries
These two Li-Ion cells are perfect for use in a goggle battery! With 2600mAh of capacity each and a 12C discharge rating, these cells will provide plenty of battery life.
As a Flight Battery
The Nitro Nectar 18650 Li-Ion cells can be used in a flight battery but do not perform as well as flight-optimized batteries due to their lower discharge rating.
Compared to the Sony VTC6 3000mAh Li-Ion, the Nitro Nectar achieved 12 minutes of flight versus 15 minutes for the Sony cells.
Using in my goggles and in TX. In TX they work great as it uses a pair of them. Kind of short battery life on my goggles that only use one, but I charge both and just swap them out which works fine.
C
Crash
Gave them a try
One of four cells purchased has an issue with capacity. Unsure of long term durability (discharge/charge cycles). Have ordered KeepPower button top protected and Panasonic 18650B and BE flat top cells from a online battery retailer for ~7 years. Zero defects. Durable cells. NBD Nectars now sit on the bench to power the fan used to keep the VTX cool or suck away flux smoke. Panasonic 18650BE sit in the RM Pocket. 600 more mAh for the same price.
b
brandon
Great quality 18650 batteries
M
Mostafa Bakir
Great batteries.
Great batteries for my jumper t20
P
Przemek W.
Work Great
Used these in my RadioMaster Pocket Controller and so far they are working great. They look cool, but unfortunately you can’t see them when installed. So far these are holding up well and I’m not seeing any issues.
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))