This cable converts USB-PD to 12V and is able to deliver up to 4.5A of power. If you have a USB-PD compatible power bank, you can easily use this cable to power your goggles. The 5.5mm x 2.1mm DC jack is compatible with commonly used FPV Goggles. Before using, please check if your USB charger/power bank is able to deliver the required power for your devices.
- Input Interface: USB-C
- Output Connector: L-shaped 5.5mm x 2.1mm DC Jack
- Output Voltage: 15V
- Maximum Output Current: 4.5A
- Cable length: 1.3m
The overview has 12 volts, the speciation has 15 volts, the bag has 15 volts, and the cable actually puts out 12 volts. Get the description and labeling corrected. Otherwise, it works fine with wall wart or battery.
As title states, this cable works perfectly with a PD power bank to use with HDZero goggles! I used it with my analog goggles and a 10000mAh bank and everything was smoooooooth.
This is perfect if you're using a power bank to power your goggles. It's long enough to have the battery in your pocket or set to the side somewhere. It feels like it's strong and will last a while.
Bought this cable + power bank to power my HD Zero goggles. Flawless victory. I was getting at most a couple hours of off/on use with 2200mah packs. Now with this cable + 20000mah power bank, after a 6 hour race I was only down to 70% battery in the bank.
Great cable. Looks very well built. However, the output of the cable is 15 V if you connect it to devices that are recent. Double check to make sure what voltages are safe for you devices.