The NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S is the latest in our annual BeeBrain series, showcasing the 5th generation of our flagship flight controller. Every year, we raise the bar by introducing cutting-edge improvements, and the BLV5 is no exception. This powerful 75mm analog whoop pairs the advanced BeeBrain BLV5 flight controller with a robust hardware setup, including 0804 14000KV motors on a 2S power configuration, delivering incredible power and long flight times.
Even with a compact 450mAh 2S battery, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S achieves an impressive 4:30 minutes of freestyle flight and up to 6:30 minutes of hovering. With a TXCO UART-based ELRS diversity receiver for extended range and a 400mW VTX featuring smart power control, this whoop is designed to provide stable connectivity and performance, making it the perfect companion for outdoor adventures.
Built with the FPV community in mind, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S reflects our commitment to innovation and excellence. Whether you’re racing or practicing freestyle, the NewBeeDrone AcroBee75 BLV5 BNF ELRS2.4G 2S offers the agility, range, and reliability you need to excel, making it the ultimate choice for pilots seeking a versatile and high-performing whoop.
Warning: All order will now ship with Caddx Ant nano 1200TVL Camera.
Intelligent Smart-Max Power Control: Smart-Max technology dynamically adjusts VTX power output based on real-time temperature monitoring to prevent overheating and protect your VTX hardware. It automatically reduces power when needed and boosts output to 400mW when temperatures allow, ensuring maximum signal strength and stable video transmission.
Flow 0804 14000KV Brushless Motor Longevity and enhanced power Great for 1S and 2S battery setups
Fly with Confidence:
Includes accessories to improve durability (prop guards) TCXO Crystal Oscillator ExpressLRS dual-antenna receiver delivers rock-solid signal transmission, making it perfect for any flight environment NewBeeDrone Cockroach75 frame with a lifetime warranty, designed to withstand the toughest conditions and provide long-lasting performance.
High-Performance Camera:
Caddx Ant Nano 1200TVL Camera with Goober Canopy V2, ⅓ inch sensor offering enhanced low-light performance and better protection Adjustable angle for different flying styles
Unleash Your Power:
Carbon Fiber Baseplate provides the most robust frame performance Sturdy design for freestyle flying or racing
Ready to Fly:
Professionally tuned PID settings for out-of-the-box performance, allowing you to fly confidently right from the start. No need for additional setup—just power up and take off!
Compact Size:
75mm frame size Weight: 36.4g (without battery) Fits standard 1S and 2S batteries
Enjoy longer flights with high-capacity battery
2S 550mAh:
Up to 6mins 30s Flight time Up to 7mins 30s Hovering Time
2S 650mAh:
Up to 7mins 30s Flight Time Up to 9mins Hovering Time
2S 850mAh:
Up to 9mins Flight Time Up to 11mins Hovering Time
The flight time was measured under ideal conditions and may vary depending on actual flying habits and environment
Power On the Receiver: Connect the receiver to a USB port or power it on three times. The blue indicator LED will start a double-blink pattern, signalling that it’s ready for binding. Ensure you are using firmware version 3.x to enable successful binding.
Prepare Your Remote Controller: Ensure that your remote controller is running ELRS 3.x firmware.
Start the Binding Process: Once the LED on the receiver begins double-blinking, proceed with the binding process on your remote controller.
Make sure both devices are running compatible firmware versions to ensure a smooth binding process.
If you mess up the setting?
Important Notice: If you experience issues with your drone, DO NOT flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team at support@newbeedrone.com
Un dron espectacular 10/10 va perfecto dentro y fuera de casa , muy contento con esta adquisición
M
Michael Monroe
Drone Issues
I received the NewBeeDrone AcroBee75 BLV5 2S and it wasn’t functional upon arrival. After a quick and helpful email exchange with the support team, I was able to get it powered on and connected to my radio. However, once in the air, it’s been flying erratically, and it seems there may be an issue with the flight controller, as I have been tuning and attempting to resolve these issues within Betaflight for over 15 hours. The NewBeeDrone staff have been very supportive throughout this process, and I’m currently waiting to hear back about a possible refund, flight controller replacement, or full drone replacement. I’ll amend this review and provide updated feedback once I hear back from NBD.
D
Daniel Ebert
Sold mine
Bought one and it would not connect to betaflight. I was not able to flash the latest software, or even adjust my rates. After a few of my local buddies tried to configure it, but no luck. I sent it in to newbee to take a look.
I received my second one and I was able to flash the props off update and changed rates.
But this one disconnects randomly, and even will throw a “flyaway” on the screen and I have to invert it to stop it from climbing. I thought it was the radio. I purchased a new boxer, and the quad will not bind using a phrase, and when I try to add it in wifi, it fails. The wifi is only up for 30 seconds at a time. I tried 3 plug method, cli method, and wifi. The radio takes the bind phrase, but this unit will not.
I will either sell this, or I will eat the cost. As I only have four quads, but I have never had this much trouble.
J
Jeffrey Harris
1st bump into something and 🔥 AIO 💨 👎🏼👎🏼👎🏼
Always been a supporter of Newbee but less than a week after purchase hit a VERY small branch at low speed and altitude and the BeeBrain AIO smoked. Newbee failed to do anything about it. Very upsetting after doing so much business with them and supporting them on all platforms of social media. Anyone wanna buy a Acrobee 75 blv5? Maybe I will buy a Happymodel Mob 8 and use this paper weight for spare parts. I was told to replace AIO 😂 Yeah cause the 1st one was obviously a quality board 🤪 and that was the day I STOPPED BUYING ANYTHING from Newbee.
B
Bruce Haynes
NewBeeDrone AcroBee75 BLV5 BNF
This is only my third FPV drone so i dont have much experience. I have a 1S whoop and a 2 inch toothpick. I purchased this one because I thought it would be a better outdoor whoop than my 1S, however this drone behaves erratically. It seems to randomly over correct especially in dives or small wind making often causing it to flip without input. My other two drones don't have this issue using the same transmitter. I also get my range on the VTX from my 1s on 200mw power making me think that the vtx rarely stays at the 400mw power when its set to max.
