Nitro Nectar 18650 Li-Ion Cells for Goggle Batteries
These two Li-Ion cells are perfect for use in a goggle battery! With 2600mAh of capacity each and a 12C discharge rating, these cells will provide plenty of battery life.
As a Flight Battery
The Nitro Nectar 18650 Li-Ion cells can be used in a flight battery but do not perform as well as flight-optimized batteries due to their lower discharge rating.
Compared to the Sony VTC6 3000mAh Li-Ion, the Nitro Nectar achieved 12 minutes of flight versus 15 minutes for the Sony cells.
One of four cells purchased has an issue with capacity. Unsure of long term durability (discharge/charge cycles). Have ordered KeepPower button top protected and Panasonic 18650B and BE flat top cells from a online battery retailer for ~7 years. Zero defects. Durable cells. NBD Nectars now sit on the bench to power the fan used to keep the VTX cool or suck away flux smoke. Panasonic 18650BE sit in the RM Pocket. 600 more mAh for the same price.
b
brandon
Great quality 18650 batteries
M
Mostafa Bakir
Great batteries.
Great batteries for my jumper t20
P
Przemek W.
Work Great
Used these in my RadioMaster Pocket Controller and so far they are working great. They look cool, but unfortunately you can’t see them when installed. So far these are holding up well and I’m not seeing any issues.
My face is pretty narrow and the stock goggles x felt terrible. This is way better but needs more foam on the sides and the bottom. Feels like the goggles are pointed down. I would buy again but still want something better. Coming from stock foam on fatshark hd02 I thought those felt great. I was going to stick to analog with how bad the stock goggles x felt.
The pieces lock together well. The adhesive is strong as well. Keep in mind that once you put some down on your drone that all your batteries will need to be outfitted.
This is a relatively inexpensive screwdriver, so adjust your expectations accordingly. If it was 2 or 3 times the price, I would certainly give it 1 star. You will need your own strong magnet if you want to magnetize the bits. The one that comes with the set is useless. The screwdriver itself is rather large, the power/torque setting switch feels really cheap. It’s also really noisy.
