Introducing the Whirligig V2 Frame! This improved version is lighter while sacrificing no durability; easy to service while sacrificing no sophistication. Near perfect center of gravity with DJI Air Unit and stack on board. Extremely versatile so you can build it however you like: analog or HD (fits both DJI Air Unit or Caddx Vista Unit); whoop board or 20x20 stack; 3'' 4'' 5'' arms - the combination is endless - even long range light weight build.
Design to work best with 1404 3000kv motors, 850mah 4s and a 20x20 FC and ESC stack for ~ 15 minutes flight time!
The 20x20 used on this frame must use M3 hardware.
Slotted M3 stack mounting holes on the bottom plate
DJI mounts in center of quad near CoG in the NBD DJI AirUnit Standoffs, M3 stack mounts in rear of quad suggested use of wire pcbs for shorter motor wires.
frame can be used without DJI Air unit
DJI Camera Mounting holes: M2 Mounting slots DJI Camera that allow for 10-40deg of cam angle
A single M2 mounting hole for traditional micro cam mounting option.
Carbon Fiber Parts: Body: Top Plate& Bottom Plate with Battery pad Side Camera Plate 3inch Arm set include front and rear arm OR 4inch Arm set include front and rear arm OR 5inch Arm set include front and rear arm
It’s a decent frame, but clearly someone was trying to get fancy with Solidworks. So let’s start there. As someone who designs frames, and 3D printed parts, I feel as this frame tries to be everything to everyone. You can install a Vista, or in my case a full sized DJI air unit. But I get the feeling it’s not best for all of them. Like, the DJI air unit already has issues with antennas popping out. And it seems this frame only amplifies that with the air unit mounting rails. And I don’t even know what’s going on with the TPU antenna holders. And there is no way to take the top plate off without dismantling the whole front camera cage. This is why I started off by saying someone was getting fancy with Solidworks. It didn’t need that cutout for those dog ears to lock the whole thing together. Engineering for the sake of engineering. So, I recommend on a full sized air unit, buy the DJI antennas without the 90deg angle and run them straight out the back. That’s why I’m back on the site, so I figured I’d write a review.
Instructions are so vague and for beginning instructions definitely need more love ..I waited 3 months for it to get shipped from the time I placed the order and not to happy .my last drone was tinygo and worked great just wanted fpv
My face is pretty narrow and the stock goggles x felt terrible. This is way better but needs more foam on the sides and the bottom. Feels like the goggles are pointed down. I would buy again but still want something better. Coming from stock foam on fatshark hd02 I thought those felt great. I was going to stick to analog with how bad the stock goggles x felt.
The pieces lock together well. The adhesive is strong as well. Keep in mind that once you put some down on your drone that all your batteries will need to be outfitted.