It's proud to announce the release of the XL10 V6 analog BNF, XL10 V6 6S Analog is a 10" BNF quadcopter that comes with the BLITZ Whoop 1.6W VTX Video Transmission System, and HQ 10" 3-Blade propellers. The XL10 V6 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING2 3110motors, BLITZ F7 Flight Controller, and the BLITZ E55 4-IN-1 ESC, which make this quad a must-have!
The XL10 V6 BNF fly is balanced because of the true X configuration and wide stance. These main changings make flight stable in the air.
Highlights
Full 3K Carbon Fiber airframe
Popular True-X configuration
Big size XING2 3110 with extreme lift and flight performance
July 6, 2023: Camera changed from RunCam Phoenix2 SE Mini to RaceCam R1 Mini.
Specifications
Product Name: XL10 V6 Analog 10 inch
FC: BLITZ F722 Flight Controller
ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
Video Transmission: BLITZ Whoop 1.6W VTX
Frame: 420mm wheelbase
Motor: XING2 3110 900KV motors
Prop: 10X4.5X3 propellers
Weight: 860g (Without Battery)
Dimensions (L×W×H):297x297x35mm
Max Speed: 140km/h
Maximum Takeoff Altitude: 6000 m
Max Hover Time: Approx. 40 mins (with 6S2P 8000mAh no load)
Max Wind Speed Resistance: Level 7
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Antennas: Single Antenna
GNSS: GPS + Galileo
Video Transmission
Product Name: BLITZ 1.6W VTX
Output Power: 0-25-400-800-1600mw
Input Volts: 12V
Working Current: ≤pit @40mA,≤25mw@150mA,≤400mw@330mA,≤800mw@460mA,≤1600mw@660mA
Transmission fre: 40CH(A-B-E-F-R)
Antenna Interface: IPEX
Mounting Hole: 25*25/φ1.6mm
Weight: 16.5 grams (Without antenna and cable)
Dimensions: L37mm*W31.5mm*H10mm
Packing List
1 x XL10 V6 6S Analog BNF
1 x Battery pad
1 x Antennas
1 x Propellers(Pair)
2 x Battery strap
1 x Screw Bag
Note
1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1)Any military combat purpose or military combat related use;
(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.
2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.