RUSHFPV RUSH BLADE F722 20x20 Flight Controller For DJI Digital FPV System
RUSH BLADE F722 Digital Mini 20x20 Flight Controller by RUSHFPV for your DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, 16Mb Black Box memory, and barometer.
FEATURES:
High-performance STM32 F722 MCU with speeds up to 216MHz.
Using MPU6000 with integrated accelerometer and gyroscope, stable and reliable.
Integrated dual 36V input synchronous rectifier power supply, and built-in power filter, up to 6S lipo battery power supply, 5V 2A /10V 1.5A output provides sufficient power, you can connect more external devices.
Modular cable design, with reliable locking structure, can be installed quickly, while retaining full-featured pads on the back, providing more expansion support.
Optimized for stack installation, the single-sided component placement method makes the thickness thinner, and the bottom is covered with complete copper to resist ESC Interference.
The full-covered lightweight metal shell protects internal electronic components and provides perfect heat dissipation.
SPECIFICATIONS:
MCU: STM32 F722 RET6 216MHz
GYRO: MPU6000
Blackbox: 16Mb SPI Flash
Input Voltage: 7-36V (3-6S)
BEC Output: 5V/2A 10V/1.5A
Ports: 6 x PWM, 5 x UART, 1 x I2C
LED: Supports WS2812 LED Strip
Mounting Holes: 20x20mm
Dimensions: 29mm x 29mm x 6.8mm
Weight: 5g (Without Cables)
Firmware Target: Rush_Blade_F7_HD
PACKAGE INCLUDES:
1 x RUSH BLADE F722 30x30 Flight Controller For DJI HD
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
