Chameleon TI 5
The Chameleon Titanium is the evolution of the all time favorite Chameleon released back in 2016. Better materials are used and many lessons learned with the Chameleon are revised in this new, state of the art design.
- Improved carbon fiber - The same material that debuted with the Rooster.
- Lighter, easier to build
- Incredibly tough Titanium front end
- Fewer total bolts, and no more M2 bolts. ALL M3
- Better VTX mounting provisions
- Better anchoring provisions for 3D printed parts
We know we can't always please everyone, but there is no reason not to offer both unibody (Chameleon Ti) and modular (Rooster) versions of our latest Titanium flagship model(s). We have been listening and now you have both options.
Have fun and fly safe!
Did you just say warranty?
As with the other frames in Armattan's FPV lineup, the 5 inch Chameleon TI is covered by Armattan's lifetime warranty. If you break part of this frame, just cover shipping and we'll send you a replacement. That's our guarantee.
2x Camera-cage braces
5x 4mm button-head M3 bolts
8x 6mm button-head M3 bolts
6x 10mm button-head M3 bolts
3x 12mm button-head M3 12.9 grade steel bolts
5x 16mm button-head M3 bolts
6x 8mm M2 cup-head (camera) bolts6x 8mm M2 cup-head (camera) bolts
1x 28.6 Front standoff (silver)
2x Rear standoffs (black)
5x 6mm standoffs
1x 2mm Top (LiPo) plate
1x 1.5mm HD Cam plate
1x 2mm Rear VTX plates (Standard and TBS)
1x 4mm Main plate 5 inch
1x 4mm Shim plate
1x Lipo strap
1x LiPo foam pad
1x HD camera foam pad
4x Dog-bone landing pads
1x Molded rubber SMA grommet (included with standard VTX plate)
3x Molded rubber antenna tube mounts (included with standard VTX plate)
Quadcopter Parts List and Armattan Chameleon Ti Build Tips - Painless360
Chameleon TI 5 Specs
|Motor to Motor||220mm|
|Frame Shape||Compressed X|
|Main Plate Thickness||4mm|
|Motor Mount Pattern||22xx|
|Center Stack Mount||30.5mm|
|FPV Camera Mount||28.5mm (Swift v2, Arrow v3, etc)|
|FPV Camera Tilt||25-60 degrees|
|Max Stack Height||22mm|