ALL DOMESTIC ORDERS COVERED BY SHIPPNG INSURANCE!
0 Panier
Ajouté au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total
    Procéder au paiement Continuer les Achats

    The new FETtec ESC 4in1 has just dropped! This high performance DShot 2400 ESC with full sine wave control now works with 3-6s. This is the most powerful and reliable 4in1 esc for the Fettec FC and Kiss FC.


    FEATURES:

    • Active current limiting @ 45A
    • Input voltage: 3S-6S
    • High quality 40V MOSFETs
    • STM32G071 @ 64MHz
    • 128 kHz motor PWM
    • Full sine wave control
    • Solder points for up to 5 additional capacitors
    • KISS FC passthrough
    • Betaflight Passthrough (available from 4.1)
    • Automatic input signal detection:
      • Dshot 300-2400
      • PWM
      • OneShot42 / 125
      • OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
      • in development: Crossfire, SBUS

    Dimensions:

    Dimensions

    • 38mm x 38mm
    • Mounting hole: 30.5 mm x 30.5 mm, M3 breakable for M4

    Firmware:

    • New FETtec firmware
    • FETtec Configurator for updates, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome plug-in

    Includes:

    • 1x FETtec ESC 4in1 6S 45A
    • Capacitor 50V, ESC <1ohm (477CKE050M)
    • JST-SH 8 pin cable

    Recommendation:

    With 6S LiPos we recommend the use of a FETtec spike absorber


    Customer Reviews

    Based on 8 reviews
    75%
    (6)
    0%
    (0)
    25%
    (2)
    0%
    (0)
    0%
    (0)
    R
    Ross peterson
    Strong

    If u like fettec this is the esc for u .. i love it

    J
    Jonathan Merz
    They’re great, love em!

    They’re great, love em! I really love all the vbat pads on each corner. Makes it easy to wire up things that need higher voltages. No shortage of bat voltage! Otherwise, very easy to wire up.

    J
    Josef Dahari
    I love me some Fettec Gear

    I love the way KISS flies. Nothing seems close to it when it works properly it's the best

    G
    Garrett Daniels
    No that strong by itself

    Flys amazing with kiss however make sure if you are 5s or 6s and a high kv, to have a spike absorber AND a capacitor on there or you will fry the board with a voltage spike. Did it with 2 escs and was super sad, however i think all is fine now

    C
    Carl gill
    You want big , this one will do it! No pun intended

    SO FAR SO GOOD ! I HAVENT HAD MUCH FLIGHT TIME YET DUE TO WORK AND BAD WEATHER BUT I HAVE KISS/FETTEC STACK IN TWO 5 INCH FRAMES AND THEY BOTH FEEL EXTREMELY STRONG AND POWERFUL!! BOTH 6S AND BOTH RUNNING A BIG CAP WITH SPIKE ABSORBER!..... WE'LL SEE HOW IT GOES !