GEP-F405-HD is a plug-and-play flight controller with F405 chip and a tower flight system with BLheli_32 50A 4 and 1 32-bit electrical modulation. It integrates 16Mb black box, MPU6000 gyroscope and barometer for a more delicate hand experience.
GEP-F405-HD supports direct insertion into DJI Digital FPV System, which can avoid the trouble of welding.Upgrade the USB interface of Type-C, greatly improve the life of the socket and reduce the risk of bad contact.
GEP-F405-HD can be used together with GEP-G50A-4IN1 for perfect flight effect.
GEP-F405-HD supports all kinds of receivers, including Sbus,PPM,CRSF,DSMX,iBus, DUMD and so on. You don’t have to worry about the remote control in your hand can’t be used.
Main Feature:
MCU: STM32F405
IMU: MPU6000(SPI)
BlackBox: 16Mb onboard Flash
Integrated LC Filter
Type-C USB interface
The directly connected DJI Digital FPV System
BLheli_32 50A ESC 4in1
Simple installation method, compact space
Support:Sbus,PPM,CRSF,DSMX,iBus
Specifications:
MCU: STM32F405
IMU: MPU6000(SPI)
DJI FPV Air Unit Supported.
BlackBox: 16Mb onboard Flash
Type-C USB interface
OSD: BetaFlight OSD w/ AT7456E chip
Baro：BMP280
BEC Output: 5V,9V BEC
Integrated LC Filter
Firmware target:GEPRCF405
Size: 36x36mm board, φ4mm with Grommets φ3mm
Power input: 3-6S LiPo
6x UART
BL32 50A ESC 4IN1:
MCU: STM32F051K86(32bit 48mHz)
Continuous Current: 50A
Peak Current: 55A (5S)
Current sensor: YES
Telemetry：Supported
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
I fly FPV but this drone is great for chilling and cruising. The motion controller was surprisingly intuitive and fun to use. I really expected I’d hate it but after a half dozen flights I still love it.
I got it anyway but 2s support would mean one cable could be used for all my batteries. I use xt30 2-3s.
Also the barrel connector doesn’t fit ev200d well for some reason. I thin the plastic extends a little far or something funky with the barrel inside.
