NEW ANNOUNCEMENT: Free domestic shipping on $50+ orders
0 Panier
Ajouté au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Procéder au paiement Continuer les Achats

    SPI Frsky version comes with Betaflight 3.5.7 firmware in order to get better RSSI range . Bind code is “Frsky_bind” in the CLI Command
    SPI Flysky version comes with Betaflight 4.2.2 firmware . Bind code is “Bind_rx” in the CLI command
    SPI DSMX version comes with Customized Betaflight 4.3.0 firmware . Bind code is “Bind_rx” in the CLI command.
    The receiver firmware of RXSR version is R-XSR_FCC_190311 that is not compatible with ISRM v2.x.x , use ISRM V1.1.3 

    41gram 1-2s brushless Toothpick drone
    New AIO 4in1 CrazybeeX flight controller
    CADDX ANT Camera
    New 1202.5 brushless motor
    XT30 connector
    Recommend to use 2s 350mah/400mah/450mah/520mah battery
    Compatible with Insta360 Go Camera

    Brand Name: Happymodel
    Item Name: Crux3
    Wheelbase: 115mm
    Size: 97mmx97mmx35mm(without propellers)
    Weight: 41g(without battery)

    Receiver option:
    Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
    Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
    Internal SPI DSM2/DSMX version(Compatible with Spektrum or Multiprotocol DSM2/X radio)
    External Frsky RXSR receiver version(ACCST D16 sbus output)
    External TBS Crossfire Nano receiver version

    Package includes:

    Item Name Qty
    Crux3 Frame and canopy 1
    Option1: CrazybeeX FR V2.2 built-in internal Frsky SPI D8/D16 receiver 1
    Option2: CrazybeeX FS V2.2 built-in internal Flysky SPI receiver
    Option3:CrazybeeX DXS V1.0 built-in internal DSM2/DSMX SPI receiver
    Option4:CrazybeeX PNP V2.2 with External Frsky RXSR receiver
    Option5:CrazybeeX PNP V2.2 with External TBS crossfire nano receiver
    Happymodel EX1202.5 KV6400 brushless motor 4
    Gemfan 3018 bi-blade Propellers(4cw+4ccw) 1
    Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera 1
    5.8G 25mw~200mw 40ch vtx (Flight controller built-in) 1
    Screw Driver 1
    Propeller disassemble tool 1
    Happymodel Handbag 1


    Spare parts specifications:

    Motor Mode: EX1202.5 KV6400
    Stator Diamter:12mm
    Stator Length:2.5mm
    Shaft Diameter:Φ1.5mm
    Motor Dimension(Dia.*Len):Φ14mm*14.5mm
    No.of Cells(Lipo):1-2S
    Propellers Gemfan 3018-2
    Center Thickness:5.5mmProp Diameter:76.5mm
    Center Hole diameter:1.5mm
    Flight controller (Frsky SPI RX version) CRAZYBEEX FR V2.2 FC  Firmware target: CrazybeeF4FR
    (Flysky SPI RX version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS
    (DSM2/X SPI RX version)CRAZYBEEX DXS V1.0 FC firmware target:CrazybeeF4DXS
    (External Frsky RXSR version) CRAZYBEEX PNP V2.2 Firmware target:CrazybeeF4DX
    (External TBS CRSF NANO version) CRAZYBEEX PNP V2.2 Firmware target:CrazybeeF4DX
    MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    Sensor: MPU-6000(SPI connection)
    Board size: 28.5 * 28.5MM
    Power supply: 1-2S battery input (DC 2.9V-8.7V)
    Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    Built-in Betaflight OSD(SPI Control)
    Built-in 5.8G VTX
    Built-in SPI Frsky/Flysky receiver or no receiver
    Built-in 5V 1A BEC
    Onboard 4in1 ESC MCU upgraded to EFM8BB21
    Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
    Support BLHeliSuite programmable
    Factory firmware: S_H_50_REV16_7.HEX
    Default protocol: DSHOT600
    Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible
    Compatible Non EU transmitter D8 modelChannels: 8ch
    Failsafe support
    No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
    Onboard Flysky SPI receiver Version SPI BUS receiver
    Protocol: AFHDS and AFHDS-2A Switchable
    Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
    Failsafe support
    Onboard DSM2/X SPI receiver Version SPI BUS receiver DSM2/DSMX compatible
    Channels: Max 12ch
    Failsafe support
    No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
    RSSI enable(show on the goggles)
    External Frsky R-XSR receiver version Weight: 1.5g
    Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
    Operating Voltage Range: 3.5V~10V
    Operating Current:70mA@5V
    Firmware Upgradable
    Compatibility: FrSky X Series modules and radios in D16 mode
    Could support Frsky New ACCESS Protocol ( Upgrade firmware)
    External TBS CRSF Nano receiver version Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible
    Onboard 5.8g VTX Output power: 25mw~200mw switchable
    Frequency: 40CH
    Input voltage: 3.3V 5.5V
    Current consumption: 300mA(type)
    Frequency: 5.8GHz 5bands 40 channels
    With Race bandSmartaudio ready
    Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor
    Horizontal Resolution: 1200 TVL
    TV System: NTSC or PAL
    IMAGE: 4:3
    Synchronization: Internal
    Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
    S/N Ratio : >52dB (AGC OFF)
    Video Output: CVBSLens: 1.8mm
    Min. Illumination: 0.001Lux@F1.2
    Auto Gain Control: YES
    BLC: YES
    WDR: Global WDR
    DNR: 3D DNR
    Dimensions: 14*14mm(with bracket to 19*19mm)
    Wide Power Input: DC 3.7-18V
    Work Temperature: -20℃~+60℃
    Weight: 2g (N.W.)

    Customer Reviews

    Based on 1 review
    ESC died after 10 flights

    The drone flies great and is very efficient (7 minutes of freestyle on a 450 2s). The electronics are quite exposed so I recommend not flying it in wet conditions or conformal coating. They really should provide some mechanism to hold the antennas in place without getting chopped up by the propeller. I got the FrSky SPI receiver and the range is quite bad, it will fall out of the sky with no warning at random when flying just 60 feet away line of sight with no obstructions. Highly recommend getting a dedicated receiver and orienting the antennas appropriately. Unfortunately one of the ESCs died after 10 flights - I did not turtle mode or block the props in anyway. Got a replacement AIO controller board for $50 to give it another shot. I choose this option so I would not have to solder/assemble but I now have to solder on a receiver and repair the drone so I can't say its a durable drone and ended up costing me as much as a higher quality, more durable quad like a diatone or iFlight which I should have gotten instead.

    Related Products

    View more
    NewBeeDrone BeeBrain Brushless FPV Drone Épuisé
    À partir de $ 139.99 $ 109.99