Build Video:


Soldering Guide:

This ESC is part of the NewBeeDrone Infinity305 Stack that is plug-and-play with the DJI Digital FPV System!

Infinity 305 ESC Spec:

  • LiPo Power input: 3S-6S
  • ESC Programming: BLHeliSuite32
  • Cont.Current: 45Ax4
  • Burst Current: 55Ax4
  • Weight / Size: 15.0g / 41x37.5x6mm
  • Mounting holes: 30.5x30.5mm
  • Signal plug JST1.0 8pin plug with NBD Infinity30FC
  • Solder pad ready for signal and power.
  • Heatsink design
  • 10 Layer PCB with 2Oz Copper Only PCB weight: 9grams
  • On board capacitor: 10uf x 48 Total 480uF, No need for external Capacitor
  • BLHeli32 Programable Sided RGB LED x4
  • Smoov performance design by Team NBD



  • 1x Infinity305 4 in 1 ESC BLHeli32
  • 4x Grommets short 4x Grommets Long
  • 5x Steel Screw 25mm
  • 13x Nylon Lock nut
  • 1x Infinity305 FC to Infinity305 ESC cable 30mm
  • 1x Infinity305 FC to Infinity305 ESC cable 50mm
  • 1x Infinity305 FC to Infinity305 ESC cable 85mm
  • 470uf 35v Electrolytic capacitor

    Customer Reviews

    Based on 5 reviews
    Ronald Alvarado
    Solid stack

    During my first year of building, the 305 is the one left standing.

    Ross peterson

    This is the best and smoothest esc i have ever had

    Gregory Bienvenu
    Best I've ever had

    The infinity 305 e.s.c.'s are by far the most robust e.s.c.'s I've ever had. I've burnt up more e.s.c's in my time than I care to say especially the FeTtec 45amp, shoot look at em to long and they spontaneously combust. I've purchased two infinity 305 e.s.c.'s and have them in my kiss builds and running dshot 2400 with absolutely no issues. Both are still running strong even had to saw my way out of a few trees. One look at these and you know they are built right. Great looking and tough as hell. Thanks for the great products. Feel free to use me as a beta tester for future products. HaHa

    Rudy Higgins

    That is totally a great combination. I wish you would put more wiring diagrams with four different receivers

    Max P.
    No Blackbox chip installed

    Just a note that this Stack doesn't have the Flash chip installed on the FC for Blackbox. It is a Rev D board, so a Winbond W25Q128JVSIM ( ) can be installed, and it works fine.

    If you buy just the FC (not the stack), maybe you get the flash chip installed?