NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built in Crossfire Rx
Warning:
We would like to remind you that our flight controller product is designed to work with our own product line. While we have taken every possible measure to ensure the quality and compatibility of our product line, using third party components may result in incompatibility or improper functioning of the product. such as Camere with different voltage signal will mass up the OSD function, frame from other company that is not fitting well with our FC, Motor plug are not compatible with the JST1.0 on the FC. etc.
We strongly recommend that you verify the compatibility and functioning before anysoldering or modification.
Please be aware, drone flight controller will break due to crash, any physical damage or crash will have posibility to destory the hardware. This is also not cover by our warranty. If you find that the product is Dead On Arrival (DOA), we will replace it for you free of charge.
However, we cannot take responsibility for any issues that may arise due to modifications made to the product or the use 3rd party components. In such cases, we will not be able to provide support or warranty coverage.
Thank you for your understanding and for choosing our product. If you have any questions or concerns, please don't hesitate to contact our customer support team.
This product is designed mainly to be a replacement part for the NewBeeDrone x Team BlackSheep AcroBee65 BLV4 Crossfire.
BeeBrain BLV4 CRSF Spec:
MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) withBeeTX 5.8Ghz Antenna ESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target:S-H-40 48kHz ESC Connector:JST-1.0 3Pin OSD: NBD7456 Graphical OSD compatible with Betaflight OSD Receiver: Crossfire Nano receiver with MINIMORTAL T ANTENNA Flight Controller Weight: 6.5g(Include antennas and battery connector) Flight Controller Size: Outer dimensions: 29x29x7.6mm Flight Controller Holes: 25.5x25.5mm Battery input: 1S Uart2: Crossfire Nano receiver
Great little AIO, saves Tango 2 users the hassle of a module bay & ELRS unit (plus all the foolishness that goes along with ELRS management). Thank you NBD!
D
Dakota Smith
Solid little Drone
I even upgraded mine with Hypertrain BB's and 2 blade props. WAY more power and still 4ish min flight time.
S
Shawn Olson
Shipped on time good customer service.
The arrival of this BLV4 was as promised. It showed up…looks like -un blemished. Haven’t installed yet.
P
Paulie Shortcuts
Mobula7 (75mm) fixed!
Broke my Mob7 FC and replaced it with this. I Used the tuning from happy model, and honestly it wasn’t the same-until I flashed bluejay, and now it floats and is very responsive-I even changed the melody to rick roll 🎵 on battery plugin. Very enjoyable flight, I just wish they had standard connectors for more experimentation without soldering or buying their products.
O
Omar Perez
Only CRSF AIO on the market!!
Welp grab yours while they’re hot! Sell NewBeeDrone out they deserve all the credit.
I had one of these board survive a shorted camera connection some how and every still worked. NBD support offered to replace it in good faith !! Best support team. What are you waiting for? For it to be sold out ? So Buy 2! Remember 1 is none and 2 is one! In the meantime 3 will be mine ! 😎
For tiny whoops weight is everything. The 75 Air frame is one option to create a light weight 75mm frame. I am enjoying mine. I migrated the motors from a Meteor65 Pro quad and use a set of 40mm propellers. Using 550 mah battery I can get a good long flight time finally.
Bought these to build a 7in 8S quad. The low kv is perfect for keeping the tip speed under Mach. These appear to be rebranded Emax EcoII, so decent quality. This quad is so powerful on 8S it's just silly. Happy Camper!