Big Baby is a 150mm X8 for 3" props. It has a 4mm base plate and a 2mm top plate. The motors are stacked using low profile 2mm catdog mounts. Stack height is 25mm (leave me a note if you'd like 30 or 40mm instead), which fits 2 4in1's and the fc. The Lumenier Lux7 is recommended for X8's. The frame is drilled for 2 30x30 and 20x20 stacks.
The fpv cam mount and antenna mounts wedge in the DJI air unit.
I'm running 1407 2800kv's with a 850 6s.
You can print the parts yourself, files arehere. If you'd like me to print the parts they can be red, orange, blue, or clear. Leave a note if you have a preference.
I'm calling this a beta 'cause I'm not sure why this little guy needs to exist, other than fun, or a tiny cine platform that can be as fast as a 5". The frame design is pretty solid and I don't anticipate it changing much.
they have a nice grippy slightly rounded top for thumbers, which I have always been, but they are also scalloped with 2 different radius for hybrid pinchers which I have wanted to use but never felt comfortable with until now. I think I am switching thanks to these sticks. fits my AG01 perfectly.
I bought it for longer flights with 6s motors, so that I can have more control and smoothness for cinematic stuff. I haven’t tested it to it’s limits because I don’t have any 5” quads with motors over 1960kv so I can’t take advantage of the C-rating the way a 4S motor would, but it has held up for me.
Stout boy. Lots of room for electronics and room for the new elrs gemini chip. I look forward to building this out and sending her Loooooong Range on MountaineerFPV on Youtube
![[pre-order] SpeedyBee 5.8 GHz Antenna V2 SMA](http://newbeedrone.com/cdn/shop/files/1000-9__56467_{width}x.jpg?v=1695705569)
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
