Throwback! These Sunnysky motors are top notch quality. With a stator size of 1103 and 10000KV, this motor will work great on 2s with props ranging from 40mm to 3" in size.

Recommended 3" frame: NewBeeDrone SavageBee 3"

Specifications

  • Stator: 1103
  • KV: 10000KV
  • Shaft Diameter: 1.5mm
  • Mounting Pattern: 9mm X
  • Mounting Screw Size: M1.8
  • Mounting Screw Length: 4mm

Note: The motor will still mount to any frame with a 9mm X pattern. Although the mounting screw size is smaller than normal, when using all four motor screws the motor does not wiggle.

 

 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Adis Hamzic
Good but shafts loose

These are pretty nice little motors, i have 3 sets. My main complaint is that nearly every motor the shaft is loose and spinning freely, that makes getting props off a no go. You will have to cut them off. I would recommend getting some green loctite and immediately put some on each shaft. add a very tiny dot where it touches the bell.

J
Joshua Speas
Classic 1103

These are actually lighter than expected and look pretty similar to Betafpv 1103. No prop screws though so be sure you use props that fit snug.