NEW ANNOUNCEMENT: Free domestic shipping on $50+ orders
0 Panier
Ajouté au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Procéder au paiement Continuer les Achats

    Using a dual gyro setup in 90° phase and a F7 processor will have your quad dialed in to the max!


    1. MCU: STM32F722RET6 216MHz
    2. 2x ICM20602 GYROS 90 deg phase
    3. Built in Betaflight OSD
    4. Up to 8S (36V) direct battery power
    5. Buzzer pads for external buzzer
    6. Built in voltage monitoring resistor
    7. 5V 2A BEC
    8. Dedicated LDO for Gyro, noise free gyro power
    9. Dedicated LDO for OSD, cleaner OSD signal
    10. Led strip shares 5V with 5V/2A BEC
    12. Built in camera control pin with resistor and capacitor
    13. 5 Full UARTS with RX AND TX pins
    14. Logical pin layout for cleanest build possible
    15. 8 pin 4 IN 1 ESC plug
    16. Remapable LED pad for additional motor output
    17. TX3, RX3 can be used for I2C for external compass
    18. 5V, VBAT selectable VTX and CAM power
    19. 16M Blackbox flash chip
    20. No flicker VTX pit mode switch (positive switch)
    21. M4 Can be selected either led strip signal or M4 signal for RPM filtering

    20 X 20 mounting hole with true 25mm board dimensions

    Official Betaflight Target: TalonF7Fusion

    Please use user1 for Pit Switch Mode Switch

    For the Legacy Clracingf7 target you will need to do the following:

    To get Motor 4 to work please use the CLI command below using Betaflight V4.0.4. A custom hex is coming soon for 4.0.4.

    Resource MOTOR 6 None

    Resource MOTOR 4 C08


    To get 5V to your VTX please go to the mode tab in Betaflight and setup a mode switch for vtx pit

    Setting up Pit Mode:

    Top Layout:

    Bottom Layout:

    Related Products

    View more
    Route Shipping Protection
    À partir de $ 0.98
    NewBeeDrone BDR Brushed Motor 3 Pack NewBeeDrone BDR Brushed Motor 3 Pack
    À partir de $ 23.99