• Description

BetaFPV TWIG XL FPV Toothpick Quad 2021 Version Crossfire

BetaFPV is proud to announce the new version of TWIG XL FPV Toothpick Quad with Racer X FPV. The first collaboration started in 2020 February. This new version has all the old features you liked along with 3.5inch propellers and a series of improvement. 

This TWIG XL frame is currently one of the most popular frames with improved frame design that offers better performance and power-to-weight ratio. With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, and 3/3.5inch propellers, it supports 450mAh 4S battery and provides you super-efficient flight experience. In addition, the injection-molded canopy protects your camera even in a crashing.

BetaFPV Twig XL Banner

Specification

  • Weight: 105g (without battery)
  • Motors: 1404 3800KV Brushless Motor 
  • Frame: TWIG XL Frame
  • Receiver Option: Frsky XM+ / TBS Crossfire
  • Recommend Battery: 450mAh 4S battery (NOT included)
  • Flight time: 3:00-5:00mins

Here is the comparison of the two version of TWIG XL quadcopter in difference.

2021 Version 2020 Version
FC Board 20A F4 2-4S AIO FC V3 12A F4 2-4S AIO FC
Camera Caddx Ratel 2 Caddx Ratel
5.8G VTX M02 25-350mW A01 25-200mW
Propellers 3.5inch 3-blades 3inch 3-blades
Canopy X-Knight Canopy Mini Canopy

TWIG XL Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” or 3.5" props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts. 

Is the original TWIG XL frame compatible with 3.5inch propellers already? The answer is YES.

BetaFPV Racer X Twig Diagram


 

Gemfan 3520 or HQ 3520

Gemfan 3520 3-Blade propellers and HQ 3520 3-Blade propellers are available for your choice to be installed on TWIG XL FPV Toothpick Quad. The three-blade design with 3.5 inches propeller diameter can provide your quadcopter with strong power off the ground.

If you want smooth freestyle flying with TWIG XL drone, it is recommended to use the Gemfan 3520 3-Blade propellers.

If you want powerful racing flying with TWIG XL drone, it is recommend to use the HQ 3520 3-Blade propellers.

 

X-Knight Canopy

The X-Knight Canopy can protect the camera lens fully comes with TWIG XL and is suitable for all mini cameras which uses 19*19mm or 20*20mm mounting hole like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3

This canopy could provide wider camera tilt angle from 10-50 degree.

X-Knight Canopy Angle

Package

  • 1 * TWIG XL 3'' FPV Quad
  • 1 * Gemfan 3520 3-Blade Props (4pcs)
  • 1 * HQ 3520 3-Blade Props (4pcs)
  • 1 * Set of M2*7 screws for propellers

*Battery is NOT included. 

BetaFPV twig XL compartment
Description

BetaFPV TWIG XL FPV Toothpick Quad 2021 Version Crossfire

BetaFPV is proud to announce the new version of TWIG XL FPV Toothpick Quad with Racer X FPV. The first collaboration started in 2020 February. This new version has all the old features you liked along with 3.5inch propellers and a series of improvement. 

This TWIG XL frame is currently one of the most popular frames with improved frame design that offers better performance and power-to-weight ratio. With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, and 3/3.5inch propellers, it supports 450mAh 4S battery and provides you super-efficient flight experience. In addition, the injection-molded canopy protects your camera even in a crashing.

BetaFPV Twig XL Banner

Specification

  • Weight: 105g (without battery)
  • Motors: 1404 3800KV Brushless Motor 
  • Frame: TWIG XL Frame
  • Receiver Option: Frsky XM+ / TBS Crossfire
  • Recommend Battery: 450mAh 4S battery (NOT included)
  • Flight time: 3:00-5:00mins

Here is the comparison of the two version of TWIG XL quadcopter in difference.

2021 Version 2020 Version
FC Board 20A F4 2-4S AIO FC V3 12A F4 2-4S AIO FC
Camera Caddx Ratel 2 Caddx Ratel
5.8G VTX M02 25-350mW A01 25-200mW
Propellers 3.5inch 3-blades 3inch 3-blades
Canopy X-Knight Canopy Mini Canopy

TWIG XL Frame

TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” or 3.5" props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts. 

Is the original TWIG XL frame compatible with 3.5inch propellers already? The answer is YES.

BetaFPV Racer X Twig Diagram


 

Gemfan 3520 or HQ 3520

Gemfan 3520 3-Blade propellers and HQ 3520 3-Blade propellers are available for your choice to be installed on TWIG XL FPV Toothpick Quad. The three-blade design with 3.5 inches propeller diameter can provide your quadcopter with strong power off the ground.

If you want smooth freestyle flying with TWIG XL drone, it is recommended to use the Gemfan 3520 3-Blade propellers.

If you want powerful racing flying with TWIG XL drone, it is recommend to use the HQ 3520 3-Blade propellers.

 

X-Knight Canopy

The X-Knight Canopy can protect the camera lens fully comes with TWIG XL and is suitable for all mini cameras which uses 19*19mm or 20*20mm mounting hole like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3

This canopy could provide wider camera tilt angle from 10-50 degree.

X-Knight Canopy Angle

Package

  • 1 * TWIG XL 3'' FPV Quad
  • 1 * Gemfan 3520 3-Blade Props (4pcs)
  • 1 * HQ 3520 3-Blade Props (4pcs)
  • 1 * Set of M2*7 screws for propellers

*Battery is NOT included. 

BetaFPV twig XL compartment

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
100%
(1)
G
Gary Padilla
Vtx was not working correctly

Looks like a cool little drone but I wouldn’t know cause vtx isn’t working correctly and I have been able to resolve problem newbee.