Designed for toothpick style AIO flight controllers and nano FPV cameras, the Pick Pocket is a light little ripper. Pocket sized, low drag, and fast as hell.
Build an ultra light 2.5″ gate crusher, or throw a dvr setup on a 3″ for some tight gaps and close proximity freestyle. You can even build a 2″ or 3″ with prop guards on em for a micro indoor/outdoor dual rate cinewhoop style beast. You can even go up to 4″ ultralight for some really long flight times and nimble response.
Designed for toothpick style flight controllers with 25.5mm to 26.5mm patterns
Also has 20×20 and 16×16 stack positions
Matte twill carbon fiber plates
Sized for 2″, 2.5″ or 3″ and now 4″ Props (see Size Chart for details)
2″ and 2.5″ have m2 on ø9 1106 motor pattern
3″ & 4″ have both m2 on ø9 1106 and m2 on ø12 1407 patterns
No 3d printing needed, comes with what you need
TPU Camera Pod fits Nano size cameras only
All parts weights are listed below in “Size Chart”
Includes 20mm M2 steel hardware
TPU spacer set easy, clean stacks
2″ model can fit 2″ prop guards
3″ for guards model can fit 3″ prop guards
Prop guards for 2″ and 3″ propsare available separately. Replacement TPU kits and spare carbon fiber plates also available soon.
We’re really loving this new micro platform, expect a couple more variations soon!
SIZE CHART
2" Model (fits prop guards)
2" prop
2mm carbon
90mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern)
6.8g carbon weight
2.5" Model
2.5" prop
2mm carbon
110mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern)
9.5g carbon weight
3" Model
3" prop
3.2mm carbon
120mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)
14.3g carbon weight
3" for Guards Model
3" prop fits prop guards
3.2mm carbon
126mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)
14.7g carbon weight
4" Model
4" prop
3.2mm carbon
152mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)
20.1g carbon weight
TPU Camera Pod
3.4g
Steel M2 hardware
2g
Description
Note: The Pivot Canopy mounts an Insta360 Go V1.
Designed for toothpick style AIO flight controllers and nano FPV cameras, the Pick Pocket is a light little ripper. Pocket sized, low drag, and fast as hell.
Build an ultra light 2.5″ gate crusher, or throw a dvr setup on a 3″ for some tight gaps and close proximity freestyle. You can even build a 2″ or 3″ with prop guards on em for a micro indoor/outdoor dual rate cinewhoop style beast. You can even go up to 4″ ultralight for some really long flight times and nimble response.
Designed for toothpick style flight controllers with 25.5mm to 26.5mm patterns
Also has 20×20 and 16×16 stack positions
Matte twill carbon fiber plates
Sized for 2″, 2.5″ or 3″ and now 4″ Props (see Size Chart for details)
2″ and 2.5″ have m2 on ø9 1106 motor pattern
3″ & 4″ have both m2 on ø9 1106 and m2 on ø12 1407 patterns
No 3d printing needed, comes with what you need
TPU Camera Pod fits Nano size cameras only
All parts weights are listed below in “Size Chart”
Includes 20mm M2 steel hardware
TPU spacer set easy, clean stacks
2″ model can fit 2″ prop guards
3″ for guards model can fit 3″ prop guards
Prop guards for 2″ and 3″ propsare available separately. Replacement TPU kits and spare carbon fiber plates also available soon.
We’re really loving this new micro platform, expect a couple more variations soon!
SIZE CHART
2" Model (fits prop guards)
2" prop
2mm carbon
90mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern)
6.8g carbon weight
2.5" Model
2.5" prop
2mm carbon
110mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern)
9.5g carbon weight
3" Model
3" prop
3.2mm carbon
120mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)
14.3g carbon weight
3" for Guards Model
3" prop fits prop guards
3.2mm carbon
126mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)
14.7g carbon weight
4" Model
4" prop
3.2mm carbon
152mm motor to motor
4 x m2 on ø9mm (1106 style motor pattern) AND 4 x m2 on ø12mm (1407 style motor pattern)