• Description

Order the Radix 2 Power Distribution Board here!

RADIX 2 is a new pimped out and vastly improved version of the legendary RADIX. From a blazing fast H7 processor running at 480 MHz, an improved graphical OSD, to 8 motor outputs, driverless flashing, and more.

RADIX 2 FC Compared to the RADIX:

  • New Processor: STM32 H7 processor running at 480 MHz with 1 MB RAM
  • New Gyro: New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
  • New Baro: Latest generation Bosch Sensortec BMP388 barometer accurate altitude readings
  • Better OSD: Improved full graphical on-screen-display (OSD) with gray levels and transparency
  • Dual camera input: Camera can be switched using a switch on the RC transmitter
  • VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts
  • 32 MByte built-in flash memory: 30 MByte available for logging and settings storage
  • Driverless flashing with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
  • RGB status LED with customizable color
  • 8 motor outputs: all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
  • 6 serial ports (UARTs): all with integrated inverters for S-BUS and other inverted protocols
  • I2C port for external sensors
  • RGB LED output
  • Buzzer output
  • Camera control output for configuring analog cameras
  • Analog RSSI input
  • 5 V regulator with 1.5 A output and up to 8S (35 V) input voltage
  • USB Type-C connector
  • Size: 37 x 37 mm (30.5 mm hole spacing)
  • Weight: 7g
Description

Order the Radix 2 Power Distribution Board here!

RADIX 2 is a new pimped out and vastly improved version of the legendary RADIX. From a blazing fast H7 processor running at 480 MHz, an improved graphical OSD, to 8 motor outputs, driverless flashing, and more.

RADIX 2 FC Compared to the RADIX:

  • New Processor: STM32 H7 processor running at 480 MHz with 1 MB RAM
  • New Gyro: New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
  • New Baro: Latest generation Bosch Sensortec BMP388 barometer accurate altitude readings
  • Better OSD: Improved full graphical on-screen-display (OSD) with gray levels and transparency
  • Dual camera input: Camera can be switched using a switch on the RC transmitter
  • VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts
  • 32 MByte built-in flash memory: 30 MByte available for logging and settings storage
  • Driverless flashing with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
  • RGB status LED with customizable color
  • 8 motor outputs: all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
  • 6 serial ports (UARTs): all with integrated inverters for S-BUS and other inverted protocols
  • I2C port for external sensors
  • RGB LED output
  • Buzzer output
  • Camera control output for configuring analog cameras
  • Analog RSSI input
  • 5 V regulator with 1.5 A output and up to 8S (35 V) input voltage
  • USB Type-C connector
  • Size: 37 x 37 mm (30.5 mm hole spacing)
  • Weight: 7g

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Ross peterson
Very good

I think thst this is definitely the better choice for big riggs