The CineRace20 O3 edition is currently the smallest cinewhoop of FLYWOO that is equipped with the DJI O3 Air unit module, measuring only 2 inch in size. It features neon LED lights, offering a variety of color options for added fun during races or other events. A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. Use TPU soft material to prevent jelly effect. Pilots can quietly enjoy the fun of shooting a video without jelly This is a truly innovative duct design. It is designed to block certain winds, increasing the thrust of the drone. The duct completely surrounds the propeller, making flying safer.
-Sub250 (even with battery)
-Support 4K\60fps recording
-GPS up to 30 satellites
-No Propellers in view, NO Jello flight Footage, stable flight picture
Recommended Battery: Exploer 450mah 4S ( flight time 5mins ) Explorer 750mah 4S ( flight time 6mins )
Real Duct design This is a truly innovative duct design. It is designed to block certain winds, increasing the thrust of the drone. The duct completely surrounds the propeller, making flying safer. Super Compact Design CineRace is double duct design , not a simple guard . It can fly as flexible as a racing drone, and as stable as Cinewhoop. Flywoo's classic compact design allows the CineRace20 and DJI O3 Air unit to be closely integrated. Ultra-Light Weight Sub250 2 inch CineWhoop below 250g even if you connect with the battery, meet the current requested of FAA rules. It can fly as flexible as a racing drone, and as stable as Cinewhoop Designing with a Focus on User Experience Multiple careful designs, convenient for your daily use Easy to adjust flight controller settings Built-in SanDisk microSD 128GB Easy to upgrade and read SD card function GOKU GM10 NANO GPS V3.0 Up to 30 satellites can be searched, making the rescue function more reliable. More assured flight, you can see the data of latitude and longitude, altitude, speed, distance Race neon LED, Buzzer alarm Allows you to control an LED light, turning it on or off as desired. It also offers a variety of color options, making it more fun to use during competitions or other events. (Changing the LED color requires soldering by yourself. If you can't solder, it is not recommended to try) No jelly Camera mount specially designed for O3 Air unit Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. Enjoy 4K Stabilized Video with 155° Ultra-Wide Angle (Source DJI) Specially redesigned camera mount for O3 Air unit, pilots can quietly enjoy the fun of shooting a video without jelly
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
