San Diego Local Pickup on all orders $50 or more!
Cart 0
Cuav Pixhack Pixhawk 32-bit Flight Controller Combo - Pixhawk - HolyBro - NewBeeDrone FPV Shop

Cuav Pixhack Pixhawk 32-bit Flight Controller Combo + GPS + 915 telemetry

$ 264.99

The CAUV Pixhack is an advanced flight controller autopilot system designed by the PX4 open-hardware project. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The benefits of the Pixhack system include integrated multi-threading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. The Pix32 allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.

The flagship Pixhack module will be accompanied by new peripheral options, including a digital airspeed sensor, support for an external multi-color LED indicator and an external magnetometer. All peripherals are automatically detected and configured.

This new design incorporates the HMC5883L digital compass, using the Ublox latest 8series module providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts. The units ship pre-configured for use with Pix32

The NEO-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 GNSS GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS) engine in the industry proven NEO form factor.The NEO-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The NEO-M8M is optimized for cost sensitive applications, while NEO-M8N and NEO-M8Q provide best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations.

Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
The NEO-M8 combines a high level of robustness and integrationcapability with flexible connectivity options. The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems. This makes NEO-M8 perfectly suited to industrial and automotive applications.The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules. For RF optimization the NEO-M8N/Q features an additional front-end
LNA for easier antenna integration and a front-end SAW filter for increased jamming immunity
This module ships with a baud rate of 38400, 10Hz



FPV Radio Telemetry Set
This Radio Telemetry kit offers a great low price, longer range (approx one mile with supplied antennas) and superior performance. The system utilizes 433Mhz (or 915Mhz) band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware

The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

Kick your mission planning into real time with Radios, featuring interchangeable air and ground modules, Android tablet compatibility, and protective cases. Radios allow your ground station computer to communicate with your vehicle wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning.915MHz and 433MHz available.

Interface to the module is via standard 5V-tolerant TTL serial / FT230 USB serial.

Full manual can be found here 



Brand name:Cuav
Item name:Pixhack Pixhawk 2.4.7 32-bit Fight Contoller
Operating temperature:-5 ° C to + 55 ° C
PM sensor operating
voltage :2-6S
PM sensor output voltage: 5.4V 3A
PWM OUT input supply voltage up to 9V


32 bit 2M flash STM32F427 Cortex M4, with hardware floating-point unit
32 STM32F103 backup coprocessor

Frequency: 168MHZ, 256K RAM

Built-in sensor
L3GD20 3-axis digital 16 gyroscope
LSM303D 3-axis 14 accelerometer / Magnetometer
MPU6000 6-axis accelerometer / magnetometer
MS5611 precision barometer

32 bit 2M flash STM32F427 Cortex M4, with hardware floating-point unit
IMU separation design,built-in versatility of shock absorption, cushioning generally do not need to deal with aircraft
3-axis 14 accelerometer / Magnetometer,6-axis accelerometer / magnetometer,precision barometer


  • ublox Neo-M8N module
  • Industry leading -167 dBm navigation sensitivity
  • Navigation update rate up to 10 Hz
  • Cold starts: 26s
  • LNA MAX2659ELT+
  • 25 x 25 x 4 mm ceramic patch antenna
  • Rechargeable 3V lithium backup battery
  • Low noise 3.3V regulator
  • Power and fix indicator LEDs
  • Protective case
  • 30cm Pix32 2.4 compatible 6-pin and APM compatible 5-pin 2 types cable included
  • Diameter 60mm total size
  • 32 grams with case

FPV Radio Telemetry Set

  • Interchangeable air and ground modules
  • Micro-USB port
  • -117 dBm receive sensitivity
  • 6-position Molex connector
  • 500 mW maximum output power (adjustable)
  • SMA connector
  • 2-way full-duplex communication through adaptive TDM
  • UART interface
  • Transparent serial link
  • MAVLink protocol framing
  • Frequency Hopping Spread Spectrum (FHSS)
  • Configurable duty cycle
  • Error correction corrects up to 25% of bit errors
  • Open-source SIK firmware
  • Configurable through Mission Planner and APM Planner
  • Supply voltage: 3.7-6 VDC (from USB or Molex connector)
  • Transmit current: 500 mA at 27 dBm
  • Receive current: 25 mA
  • Serial interface: 3.3 V UART


Package Includes


Package Includes:

  • 1 X PIXHACK flight control
  • 1 X LED & USB expansion of small plates
  • 1 X 8CH PPM encoder
  • 1 X Voltage and current sensor (not welded
  • 1 X 8G memory card
  • 1 X Buzzer + unlock switch expansion board
  • 1 X Standard data transmission interface
  • 1x Neo 8 GPS set
  • 1x 900 Telemetry set

    Ublox NEO-M8N GPS

    • 1x NEO-M8 with compass module and case set
    • 1x Pix32 compatible 6pin cable
    • 1x APM compatible 5pin cable
    • 1x 'X' type folding pedestal mount
    • 1x carbon rod 100mm & 140mm

    FPV Radio Telemetry Set

    • 2x Radio modules with antennas
    • 1x Micro-USB cable
    • 1x Android OTG adapter cable
    • 1x 6-wire Pix32 connector cable
    • 1x 6-to-5-position APM and PX4 connector cable

    Share this Product

    More from this collection



    Sold Out