• Description

Description

MAMBA | Super Big Soldering Pad

MAMBA Basic F722 MK3 Flight Controller

Diagram Link From Help Centre Link

 

Fixed

  1. Add I2C function
  2. When you connect the USB, the receiver and OSD settings can be saved
  3. Increase the pad area
  4. LED signal selection (when Mamba Led sys avaiable)
  5. BEC short circuit protection
  6. TVS instant high voltage protection 30V

Update

  1. F405 models support F.prot(Most)
  2. Upgrade the anti-interference cable
  3. Use Typec(Most)
  4. The pad area of Mini flight controller (20×20) increased by 140%

Added

  1. Add self-recovery insurance to the receiver's 5V power supply
  2. Increase the camera VCC power supply pad
  3. Standard flight controller (30.5×30.5) adds spare pad
  4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

    Specification:

    • MCU: 216MHz STM32F722RET6
    • IMU: MPU6000
    • Barometer: Yes
    • OSD: Yes
    • Blackbox: 16M Flash Memory
    • Uarts: 6Set
    • ESC Soft: Dshot300/600/1200
    • ESC Telemetry: Yes
    • Power Led: Yes
    • LED Controller: BF LED/MB LED 4 Set 2812 LED
    • F.Port: Yes
    • RSSI: Yes
    • Buzz: Yes
    • Input: 3~6S Lipo (12.6~25.2V)
    • TVS Protection: Yes
    • BEC:3.3V 0.5A&  5V 3A (System Power))&                           
    • 5V 3A(LED )& 9V 3A
    • MOUNTING: 30.5mm,M3

    Diagram Link From Help Centre Link

          Description

          Description

          MAMBA | Super Big Soldering Pad

          MAMBA Basic F722 MK3 Flight Controller

          Diagram Link From Help Centre Link

           

          Fixed

          1. Add I2C function
          2. When you connect the USB, the receiver and OSD settings can be saved
          3. Increase the pad area
          4. LED signal selection (when Mamba Led sys avaiable)
          5. BEC short circuit protection
          6. TVS instant high voltage protection 30V

          Update

          1. F405 models support F.prot(Most)
          2. Upgrade the anti-interference cable
          3. Use Typec(Most)
          4. The pad area of Mini flight controller (20×20) increased by 140%

          Added

          1. Add self-recovery insurance to the receiver's 5V power supply
          2. Increase the camera VCC power supply pad
          3. Standard flight controller (30.5×30.5) adds spare pad
          4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

            Specification:

            • MCU: 216MHz STM32F722RET6
            • IMU: MPU6000
            • Barometer: Yes
            • OSD: Yes
            • Blackbox: 16M Flash Memory
            • Uarts: 6Set
            • ESC Soft: Dshot300/600/1200
            • ESC Telemetry: Yes
            • Power Led: Yes
            • LED Controller: BF LED/MB LED 4 Set 2812 LED
            • F.Port: Yes
            • RSSI: Yes
            • Buzz: Yes
            • Input: 3~6S Lipo (12.6~25.2V)
            • TVS Protection: Yes
            • BEC:3.3V 0.5A&  5V 3A (System Power))&                           
            • 5V 3A(LED )& 9V 3A
            • MOUNTING: 30.5mm,M3

            Diagram Link From Help Centre Link

                  Customer Reviews

                  No reviews yet
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)
                  0%
                  (0)