• Description

Description

Note:Shipping about Mid-May. Please forgive.

Specification:

MAMBA RACE F75_BL32 Dshot1200 4IN1 Electronic Speed Controller 75A 6S

  • INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
  • CONTINUE CURRENT: 75A×4
  • BURST CURRENT: 85A (10S)
  • BEC: NO
  • SOFT: Dshot300/600/1200
  • Target:BLHeli_32
  • MAMBA RACEF75_BL32
  • TVS Protection: Yes
  • MOUNTING: 20mm/M3/M2
  • Supply :
  • 8pin sh1.0 ×2
  • AMASS Original XT60
  • High-Frequency 470uF/35V

mamba Race F75 BL 32

        Description

        Description

        Note:Shipping about Mid-May. Please forgive.

        Specification:

        MAMBA RACE F75_BL32 Dshot1200 4IN1 Electronic Speed Controller 75A 6S

        • INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
        • CONTINUE CURRENT: 75A×4
        • BURST CURRENT: 85A (10S)
        • BEC: NO
        • SOFT: Dshot300/600/1200
        • Target:BLHeli_32
        • MAMBA RACEF75_BL32
        • TVS Protection: Yes
        • MOUNTING: 20mm/M3/M2
        • Supply :
        • 8pin sh1.0 ×2
        • AMASS Original XT60
        • High-Frequency 470uF/35V

        mamba Race F75 BL 32

              Customer Reviews

              Based on 1 review
              100%
              (1)
              0%
              (0)
              0%
              (0)
              0%
              (0)
              0%
              (0)
              J
              Jdowding
              Octo mamba

              I used the 75 amp Mamba in my octo build. Two ESCs stacked on each other. High amp is a must, 20x20 made an easy fit. The combo plug and solder pads also made it easy to connect the two ESCs to the FC.