• Description

Design Feature

Tailored for DJI high-definition digital transmission, equipped with two dedicated bases for digital transmission and simulation, taking into account high strength and lightweight.

Thick wing shape, can not only slow and long endurance but also ensure the maneuverability of high-speed maneuvering flight.

The cabin adopts a dual-track design, and the aircraft's center of gravity can be adjusted at will.

A new way of fixing the propeller, extremely lightweight.

The light-transmitting design of the taillight ensures that the pursuit of the target is clearly visible, and the fun is unlimited.

The independent detachable lens plug prevents excessive airflow into the warehouse.

Four magnetic structures, firmly lock the cabin cover.

The wing adopts three embedded carbon fiber rods with different angles and a high-strength design, which can easily cope with large loads and high-speed flight.

Horizontal/Vertical Two battery placement methods.

Small wingspan, large space, worry-free placement of electronic equipment.

The unobstructed intake fluid design ensures that the electronic equipment in the cabin always works coolly.

Specifications

  • Material:EPP/ABS /Carbon Fibre
  • Size:Wingspan 690mm Height:88mm Length:415mm
  • Weight:150g
  • take off weight:350g~750g

CF Size

  • 4. 7mm*3. 2mm*400mm (OD * ID * Length, wing tandem bar)
  • 7mm*5mm*170mm (OD * ID * Length, wing embedded stiffener rod)
  • 5mm*1mm*220mm (Width * Thickness * Length, Inset Reinforcements on Wings)

Body space

  • battery compartment: 175mm*75mm*55mm (maximum size)
  • ESC compartment: 70mrn*38mm*20mm (maximum size)
  • Camera: 20mm*21mm*30mm (maximum size)
  • Camera protection ring: outer diameter 17. 5 inner diameter 14mm / 15mm, height 12mm

Material: ABS
Minimum flying speed: <27km/h
Maximum flight speed: >200+km / h

Note:
Over 100km/h, a lens cap must be installed to prevent excessive air from entering and detaching the hatch.
Maximum endurance time:> 70min
Maximum cruising range: >45km

PNP KIT Includes

  • Motor: FX-2205/2350 kv
  • ESC: FX-35A
  • Propeller: 5*5E/6*4e
  • Servo: digital 9g
  • Thrust: ≥920 g(6*4 Prop)

Battery not included. 2-4s is recommended.  175mm*75mm*55mm (maximum size).

BNF KIT=PNP+Receiver

Receiver optional:
Mamba MSR Receiver(Frsky RXSR)/ TBS CRSF Receiver

Description

Design Feature

Tailored for DJI high-definition digital transmission, equipped with two dedicated bases for digital transmission and simulation, taking into account high strength and lightweight.

Thick wing shape, can not only slow and long endurance but also ensure the maneuverability of high-speed maneuvering flight.

The cabin adopts a dual-track design, and the aircraft's center of gravity can be adjusted at will.

A new way of fixing the propeller, extremely lightweight.

The light-transmitting design of the taillight ensures that the pursuit of the target is clearly visible, and the fun is unlimited.

The independent detachable lens plug prevents excessive airflow into the warehouse.

Four magnetic structures, firmly lock the cabin cover.

The wing adopts three embedded carbon fiber rods with different angles and a high-strength design, which can easily cope with large loads and high-speed flight.

Horizontal/Vertical Two battery placement methods.

Small wingspan, large space, worry-free placement of electronic equipment.

The unobstructed intake fluid design ensures that the electronic equipment in the cabin always works coolly.

Specifications

  • Material:EPP/ABS /Carbon Fibre
  • Size:Wingspan 690mm Height:88mm Length:415mm
  • Weight:150g
  • take off weight:350g~750g

CF Size

  • 4. 7mm*3. 2mm*400mm (OD * ID * Length, wing tandem bar)
  • 7mm*5mm*170mm (OD * ID * Length, wing embedded stiffener rod)
  • 5mm*1mm*220mm (Width * Thickness * Length, Inset Reinforcements on Wings)

Body space

  • battery compartment: 175mm*75mm*55mm (maximum size)
  • ESC compartment: 70mrn*38mm*20mm (maximum size)
  • Camera: 20mm*21mm*30mm (maximum size)
  • Camera protection ring: outer diameter 17. 5 inner diameter 14mm / 15mm, height 12mm

Material: ABS
Minimum flying speed: <27km/h
Maximum flight speed: >200+km / h

Note:
Over 100km/h, a lens cap must be installed to prevent excessive air from entering and detaching the hatch.
Maximum endurance time:> 70min
Maximum cruising range: >45km

PNP KIT Includes

  • Motor: FX-2205/2350 kv
  • ESC: FX-35A
  • Propeller: 5*5E/6*4e
  • Servo: digital 9g
  • Thrust: ≥920 g(6*4 Prop)

Battery not included. 2-4s is recommended.  175mm*75mm*55mm (maximum size).

BNF KIT=PNP+Receiver

Receiver optional:
Mamba MSR Receiver(Frsky RXSR)/ TBS CRSF Receiver

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)