The BDI DJI Digidapter V2 is an analog module adapter for the DJI Goggles V1 & V2. This kit integrates any analog module into the DJI Goggle faceplate. Compatible modules include the TBS Fusion, Foxxer Wildfire, Rapid Fire, True D-X, Eachine Pro58, and more.

New Features

  • You ask, BDI actually listens! The Digidapter now includes an on/standby switch for your analog module.
  • Updated wiring kit (also sold separately for V1 users) that is specifically molded and lengthed for the DJI goggles to keep the look clean, reduce snagging, and prevent accidental misplugs.
  • 6s LiPo input, up from 4s.

The new cabling design sits flush with the Digidapter V2 and a screwless cable management clip ensures your cables stay in place, with a strain relief loop to ensure your goggles never come unplugged.


  • Dimensions: 158 x 74 x 40 mm (6.25 x 3 x 1.6 inches)
  • Weight: 34g
  • Packaged Weight: 110g


  • 5.5mm x 2.1mm DC In 7.4v-26v (2s-6s)
  • 4 pole 3.5mm video/audio out
  • 9 pin RF module receiver header

Short delay tactile power button for analog module

  • 5.5mm x 2.1mm male to dual 5.5mm x 2.1mm female DC jack splitter
  • 4 pole gold plated 3.5mm male to 3.5mm male video cable
  • Dual 4 Pole 3.5mm male to 3 Pole 3.5mm female splitter video/audio cable

Screwless strain relief clip and cable management clips

Maximum Input Voltage
26.1 Volts DC

Minimum Input Voltage
7 Volts DC

Nominal Output Voltage
5 Volts DC

Maximum Module Supply Current
1.0 Amp

Rated Continuous Power
5 Watts

Matte black, Injection moulded, Acrylonitrile butadiene styrene (ABS)

What’s in the box

  • 1 x DigidapterV2 faceplate
  • 1 x Analog video cable
  • 1 x Analog video/audio splitter for audio out
  • 1 x Dual DC/DC male to single DC female split cable
  • 1 x Allen key
  • 2 x 12mm cap head bolts
  • 1 x Cable strain relief clip
  • 2 x Cable clips

    Customer Reviews

    Based on 9 reviews
    Love it!

    using with my TBS Fusion and DJI Goggles v2. like the power switch, cable management, and power splitter cable. looks nice with the Fusion and goggles, and didn't hafve to do any soldering or hackjob modifications to the goggles.

    Works great with a 4S 4000mah battery + a XT60 -> DC5.5 2.1 barrel plug adaptor (the cable that comes with the NewBeeDrone repair kit soldering iron does not work)

    Jeff C
    Bdi digiadaptor

    Best dji analog adaptor

    Iosebi Bazarashvili
    Coolest addon ever 👌🖐

    It fits perfectly, and its just great addition to dji goggles ❤ I was lucky to get the last one available 😄

    Trevor Hjelmfelt
    This let me have my DJI cake and eat it too!

    I wanted to experience DJI digital but I still needed analog for most of my drones and this adapter let me get both worlds on my DJI V2 goggles. This installs very easily (two screws) and looks like it was meant to be there instead of being an obvious modification. The included cables are just the right size to keep the routing clean. The module is pretty much facing forward so you don't really need to worry about angling the directional antennas.
    I contacted BDI and NewBee Drone support on this order for some information on a potential issue (which I didn't end up having) and both responded to me personally very quickly.

    Darren Archer
    Awesome product!

    I was tired of setting up and using 2 separate pairs of goggles every time I fly. This was a good solution, super easy to install, works great. Analog on the dji goggles looks nice. I recommend this product, 5 stars.