• Description

Product information FETtec FC G4

Grab a FETtec ESC here!

Features:

  • Latest STM32G4 Processor

    • 170Mhz + Math accelerator

    • MPU6000

  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND

    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND

    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec KISS firmware

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

      • Filter (PIDs, Rates, Settings)
      • LED control (RGB LED, Racewire)
      • VTX
      • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
      • KISS GPS support + live map
      • Custom graphic pilot logo
      • Stick overlay
      • Custom layout
      • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

 

*real Pit-Mode: A power supply pin which is remotely switchable

 

Dimensions:

FETtec Kiss FC G4 Flight Controller Dimensions

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)

    • 30 x 30mm with M3 mounting hole

    • 30 x 30mm mounting hole tips are removable to reduce overall FC size

  • Overall height: 7,9mm

  • Weight: 5,37g

 

Firmware:

  • KISS Firmware
  • FETtec OSD Firmware

 

Scope of delivery:

  • 1x FETtec FC G4
  • 1x 8 pin cable (open on one side)
  • 1x 6 pin cable (open on one side)
Related links to "FETtec FC G4"
Available downloads:
    Description

    Product information FETtec FC G4

    Grab a FETtec ESC here!

    Features:

    • Latest STM32G4 Processor

      • 170Mhz + Math accelerator

      • MPU6000

    • Supply voltage 6-27V (2S-6S Lipo)

    • 2x dedicated onboard BEC (max. 600mA each)

      • 5V BEC for RX

      • 5V/16V BEC for VTX (switchable and real Pit*)

    • 2x 8 pin connector for solder free ESC connection

      • Connector 1: ESC signal 1-4, telemetry, VCC, GND

      • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

    • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

      • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

    • 2x 6 pin connectors for serials

      • RX1, TX1, 3.3V, VCC, 5V, GND

      • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

    • 1x 4 pin connector for receiver

      • Signal, TLM, 5V, GND

    • 5 UART serials

      • UART 1 free

      • UART 2 used for Receiver

      • UART 3 free

      • UART 4 used for onboard OSD, can be set free

      • UART 5 used for ESCs / TLM / Onewire

    • 4 ESC solder pads (Signal/GND) in each corner

    • Buzzer pads

    • 4 tiny RGB LEDs (selectable color)

    • Supported ESC protocols

      • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

    • FETtec KISS firmware

    • Onboard OSD

      • Graphic OSD (STM32)

      • Full KISS Tuning

        • Filter (PIDs, Rates, Settings)
        • LED control (RGB LED, Racewire)
        • VTX
        • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
        • KISS GPS support + live map
        • Custom graphic pilot logo
        • Stick overlay
        • Custom layout
        • can be deactivated for usage of digital systems
    • Connector type: JST-SH-1mm

     

    *real Pit-Mode: A power supply pin which is remotely switchable

     

    Dimensions:

    FETtec Kiss FC G4 Flight Controller Dimensions

    • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

    • Mounting hole arrangement:

      • 20 x 20mm with M2 mounting hole (expandable to M3)

      • 30 x 30mm with M3 mounting hole

      • 30 x 30mm mounting hole tips are removable to reduce overall FC size

    • Overall height: 7,9mm

    • Weight: 5,37g

     

    Firmware:

    • KISS Firmware
    • FETtec OSD Firmware

     

    Scope of delivery:

    • 1x FETtec FC G4
    • 1x 8 pin cable (open on one side)
    • 1x 6 pin cable (open on one side)
    Related links to "FETtec FC G4"
    Available downloads:

      Customer Reviews

      Based on 7 reviews
      71%
      (5)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      29%
      (2)
      S
      Steve
      Poor quality components

      I’ve now had 2 fettec devices fail due to (in my opinion) fragile component mounts. Just bumping a surface mount device is very likely to knock it off the board. It’s ruined and I won’t buy another fettec component. Similar thing happened to an aio that I purchased and fettec support said “too bad”.

      M
      Max Cole
      Never got the chance to fly it.

      I was very hyped to try this flight controller, unfortunately, i could not get it to communicate with my crossfire sixty9 and checking everything and making configuration changes it still wouldn’t work, I upgraded the firmware and it ended up frying before I could ever fly it. Submitted a support ticket and haven’t heard back. Extremely disappointed.

      P
      PeterFPV
      Amazing work here!

      Innovative and amazing fc! Love fettec!

      K
      Karen
      G4

      Other than ultra, best FC you can buy

      J
      Jonathan Merz
      Onboard OSD… finally

      Yeah, what the title says. To reiterate… FINALLY!!