The Moblite7 is one of the most streamlined low-profile BNF whoops available on the market. This 75mm lowrider boasts a RunCam Nano 3 camera along with a VTX capable of up to 200mW, the extremely light AIO FC powers the unibell 0802 motors.

This whoop is a blast, with plenty of power and quality video.

FEATURES:

  • The lightest 1s 75mm brushless whoop
  • Powerful and efficiency
  • The lightest 1s AIO 5IN1 F4 flight controller
  • New Unibell EX0802 brushless motors
  • Low profile Canopy design
  • VTX power switchable 25mw~200mw

SPECIFICATIONS:

  • Wheelbase: 75mm
  • Size: 97x97x25mm
  • Weight: 19.5g (without battery)
  • Weight: 36g (with Original 1s 650mah Lipo battery )

Motor:

  • Model: EX 0802 19000KV ( New Unibell Version)
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
  • Weight(g): 1.7g
  • No.of Cells(Lipo): 1S only

Flight Controller:

  • (Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR
  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000 (SPI connection)
  • Original whoop size compatible
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky/Flysky receiver
  • Built-in 5V 1A BEC
Onboard 4in1 ESC:
  • MCU Upgraded to EFM8BB21
  • Power Supply: 1S LiPo/LiPo HV
  • Current: 5A continuous, peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory Firmware: O_H_50_REV16_8.HEX
  • Default Protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:

  • SPI BUS Receiver Frsky D8 Compatible
  • Compatible Non EU transmitter D8 model
  • Channels: 8CH
  • Failsafe Support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard Flysky Receiver Version:

  • SPI BUS Receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8CH (AFHDS) or 14CH (AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
  • Failsafe Support

Onboard 5.8G 40CH 25-200mW VTX:

  • Output Power: 25mw~200mw switchable
  • Frequency: 40CH
  • Input Voltage: 3.3V 5.5V
  • Current Consumption: 300mA (type)
  • Frequency: 5.8GHz 5bands 40 channels (include Race band)
  • Smartaudio Ready

Runcam Nano 3 FPV Camera:

  • Image Sensor: 1/3" CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.1mm(M8) FOV 160°
  • Signal System: PAL/NTSC Non Switchable
  • S/N Ratio: >50dB
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Lipo Battery:

  • Capacity: 650mAh
  • Voltage: 3.8V
  • Continuous Discharge Rate: 30C
  • Instantaneous Discharge Rate: 60C
  • Size: 60mmx18mmx8mm
  • Weight: 16g
  • Connector: PH2.0

PACKAGE INCLUDES:

  • 1x HappyModel BNF Moblite7 Whoop - FrSky
  • 2x 1S 650mAh LiPo Battery

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Aadric Allan
amazing

best flight time iv gotten outta all of my whoops

A
Anonymous
WOW!

It's super powerfull. I don't like the holder of the camera. I prefer to use a normal canopy, like on Mob6.

R
Rey E.
Wow a supercharged Woop!!!

I have a few FpV but the Moblite7 by far the best and fun the fly. I already recommended to a few coworkers that are just starting to FPV. Great product for a great price two thumbs up 👍🏽 Thanks