NEW ANNOUNCEMENT: Free domestic shipping on $50+ orders
0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Check Out Continue Shopping

    With one of the best nano cameras the Runcam Nano3 , this craft is ready to rip some packs indoors/outdoors right out of the box! Adjustable camera angles helps adapt to where you are flying quick and easy!

    This BNF FPV Drone works amazing paired with our Nitro Nectar Gold 300mah 1s HV Lipos!

    Available in 2 different KV options:
    25000KV for crazy fast races.
    19000KV for great all around performance and racing.


    Crazybee F4 LiteFlight Controller
    Built-in ESC & Receiver & VTX

    • Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
    • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
    • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    • Sensor: MPU-6000(SPI connection)
    • Board size: 28.5 * 28.5MM
    • Power supply: 1S battery input (DC 2.9V-4.35V)
    • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    • Built-in Betaflight OSD(SPI Control)
    • Built-in 5.8G VTX
    • Built-in SPI Frsky/Flysky receiver
    • Built-in 5V 1A BEC
    • Built-in voltage detection

    Onboard Frsky Receiver Version

    • SPI BUS receiver Frsky D8 or D16 compatible
    • Compatible Non EU transmitter D8 model
    • Channels: 8ch
    • Failsafe support
    • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

    Onboard Flysky Receiver Version

    • SPI BUS receiver
    • Protocol: AFHDS and AFHDS-2A Switchable
    • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
    • Failsafe support

    Onboard 5A BLheli_S 4in1 ESC

    • MCU upgraded to EFM8BB21
    • Power supply: 1S LiPo/LiPo HV
    • Current: 5A continuous peak 6A (3 seconds)
    • Support BLHeliSuite programmable
    • Factory firmware: O_H_5_REV16_7.HEX
    • Default protocol: DSHOT600

    SE0802 19000KV / 25000KV Motor

    • Model: SE0802
    • KV: 19000KV / 25000KV Motor
    • Configu-ration: 9N12P
    • Stator Diamter: 8mm
    • Stator Length :2mm
    • Shaft Diameter: 1mm
    • Motor Dimension(Dia.*Len) ¶10.5mm*14.9mm
    • Weight(g): 1.9g
    • No. of Cells(Lipo): 1S only

    Gemfan 1219 3-Blade Propeller Brand Name: Gemfan

    • Center Thickness: 5mm
    • Prop Disk Diameter: 31mm
    • Center Hole Inner diameter: 1.0mm
    • Quantity: 4 CW & 4 CCW
    • Weight: 0.28g

    Onboard 5.8G 40CH 25mW VTX Output power: 25mw

    • Frequency: 40CH
    • Input voltage: 3.3V 5.5V
    • Current consumption: 300mA(type)
    • Frequency: 5.8GHz 5bands 40 channels
    • With Race band
    • Smartaudio ready

    Runcam Nano 3 FPV Camera

    • 1/3 CMOS 800TVL Camera
    • Field of View: 120°
    • Electronic Shutter Speed: Auto
    • Auto Gain Control (AGC): Auto
    • Min. Illumination: 0.01Lux@1.2F
    • D-WDR: Auto
    • Day/Night: Color
    • Power:DC 3-5.5V
    • Current: 110mA@5V 120mA@3.3V
    • Housing Material: ABS
    • Net Weight: 1.2g
    • Dimensions: L14mm*W14mm*H9mm


        • 1x HappyModel Mobula6 1S FPV Racing Drone
        • 1x 1S Lipo/LIHV USB Charger
        • 1x Propeller Tool
        • 4x 300mah HappyModel batteries

        Customer Reviews

        Based on 2 reviews
        Solid BL whoop

        Great little whoop for indoors or small/still outdoors. Very rugged and reliable. Performs great. Be sure to check out the Project Mockingbird tune for it.


        the black collar on the motor can slide down overtime, but just slide it back up to fix it. Some problems with turtle mode, only flips 50% of the time. Also, the dsm version is just an frsky quad with an external dsm receiver added, so some extra weight.

        Related Products

        View more