High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environment
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
Specifications
Input Voltage: 3-6S
Cont.Current: 40A x4
Burst Current: 60A x4
BEC Output: NO
Input wires: Red-14AWG-100mm/ Black-14AWG-100mm
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 plug enclosed with package.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
Darren excelled in selecting the development kit and essential accessories that would have to purchase separately, ensuring I made an informed purchase. His attention to detail and dedication prevented any post-purchase disappointment. I am thoroughly pleased and grateful for his exceptional service.
An absolute pleasure to fly. Handles incredibly well and responds to any input just as I expected.
The only criticism is not of the performance of the drone. Unfortunately, it arrived with damage to the canopy. But I was still able to fly it and make initial observations.
Update process is cumbersome, better if done with the VTX out of the quad. Also the update port is much flimsier than the earlier 2 antenna versions, IMO.