{"product_id":"holybro-x500-v2-kit-pixhawk-6x-standard-set-m10-gps-915mhz-radio","title":"Holybro X500 V2 Kit-Pixhawk 6X Standard Set+M10 GPS+915MHz Radio)","description":"\u003ch2\u003eHolybro X500 V2 Kit-Pixhawk 6X Standard Set+M10 GPS+915MHz Radio)\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003eNote: Currently shipping REV 8, it has 3x ICM-45686 IMU with BalancedGyro™ Technology, please see \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.holybro.com\/autopilot\/pixhawk-6x\/supported-firmware\" target=\"_blank\"\u003ethis page\u003c\/a\u003e for the latest firmware support information.\u003c\/span\u003e\u003c\/em\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003cu\u003e\u003cem\u003e\u003cbr\u003ePX4 Development Kit - X500 v2\u003c\/em\u003e\u003c\/u\u003e\u003c\/strong\u003e is an affordable, lightweight, and robust carbon fiber professional development drone kit with the latest Holybro \u003ca href=\"https:\/\/shop.holybro.com\/pixhawk-6c-plastic-case_p1353.html\"\u003ePixhawk 6C \u003c\/a\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/holybro.com\/collections\/autopilot-flight-controllers\/products\/pixhawk-6x-new\" title=\"Pixhawk 6x\" target=\"_blank\"\u003ePixhawk 6X\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eFlight Controller,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/shop.holybro.com\/power-modulepm02-v3_p1185.html\"\u003eM8N GPS\u003c\/a\u003e, and plug \u0026amp; play \u003ca href=\"https:\/\/shop.holybro.com\/sik-telemetry-radio-v3_p1103.html\"\u003eSiK Telemetry Radio\u003c\/a\u003e. It is quick and easy to assemble (~30 minutes) without the need for soldering, so you can spend more time flying and developing instead. It comes with the X500 V2 Frame Kit and motors, ESCs, power distribution boards, and extra propellers. The Drone Arms are pre-installed with Motors and ESCs so they can be plugged right into the power distribution board without the need for soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Frame (\u003cem\u003e\u003cu\u003e\u003ca href=\"http:\/\/shop.holybro.com\/x500-v2-kit_p1288.html\"\u003eX500 v2\u003c\/a\u003e\u003c\/u\u003e\u003c\/em\u003e) is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber-reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier \u0026amp; more straightforward installation. The landing gear consists of 16mm \u0026amp; 10mm diameter carbon fiber tubes with connectors that have been thickened and strengthened.\u003cbr\u003e\u003cbr\u003eThe platform board now has mounting holes for GPS \u0026amp; popular companion computers such as the Raspberry Pi 4 \u0026amp; Jetson Nano. There is an\u003c\/span\u003e\u003cspan\u003e optional Depth Camera Mount (available separately) for various depth cameras such as the Intel RealSense series \u0026amp; Structure Core Depth Cameras. The spacing between the top and bottom carbon fiber plates has been increased to provide easier access. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight times. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. All tools for installation are provided in the package. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe Pixhawk 6C Flight controller is compatible with both PX4 \u0026amp; Ardupilot, but it is shipped with PX4 open-source firmware. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll new \u003ca href=\"https:\/\/shop.holybro.com\/pixhawk-6c-plastic-case_p1353.html\"\u003ePixhawk 6C \u003c\/a\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/holybro.com\/collections\/autopilot-flight-controllers\/products\/pixhawk-6x-new\" title=\"Pixhawk 6X\" target=\"_blank\"\u003ePixhawk 6X Flight Controller\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewith\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/holybro.com\/collections\/standard-gps-module\/products\/m10-gps?variant=42991226192061\"\u003eM10\u003cspan\u003e \u003c\/span\u003eGPS Module\u003c\/a\u003e and Plug \u0026amp; play \u003ca href=\"https:\/\/shop.holybro.com\/sik-telemetry-radio-v3_p1103.html\"\u003eSiK Telemetry Radio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNew frame design with minimal assembly time (~30 minutes), No soldering required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarbon Fiber frame with fiber-reinforced nylon connectors providing easy \u0026amp; straightforward installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePre-installed motors \u0026amp; ESCs with simple XT30 power plugs for PDB\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA power distribution board (PDB) with XT60 \u0026amp; XT30 plugs \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMount for companion computers such as Raspberry Pi \u0026amp; Nvidia Jetson Nano\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional depth camera mount for Intel RealSense \u0026amp; Structure Core\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting holes ready for Pixhawk Jetson baseboard (require standoffs)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe Pixhawk 6X version now ships with the\u003cstrong\u003e PM02D-HV\u003c\/strong\u003e (High Voltage) version. In PX4, you must set \u003cstrong\u003e\u003cem\u003eSENS_EN_INA228 \u003c\/em\u003e\u003c\/strong\u003eto enable this\u003ci\u003e. \u003c\/i\u003eThis HV version is only supported in Ardupilot 4.4 \u0026amp; later. Setup Guide can be found \u003cstrong\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.holybro.com\/power-module-and-pdb\/power-module\/digital-power-module-pm-setup\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cstrong\u003eFirmware Support for M10 GPS: \u003c\/strong\u003ePX4 1.14 and ArduPilot 4.3 or newer is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cu\u003e\u003cstrong\u003ePX4 Development Kit - X500 v2 Includes:\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFlight controller: \u003ca href=\"http:\/\/shop.holybro.com\/pixhawk-6c-plastic-case_p1353.html\"\u003ePixhawk 6C (Plastic Case)\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/sc2vs1ppkdbaeg1k-60459057341.shopifypreview.com\/collections\/power-modules-pdbs\/products\/pm02-v3-12s-power-module\"\u003ePM02 V3\u003c\/a\u003e or  \u003c\/span\u003e\u003ca href=\"https:\/\/holybro.com\/products\/pixhawk-6x\"\u003ePixhawk 6X (v2A baseboard)\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/sc2vs1ppkdbaeg1k-60459057341.shopifypreview.com\/collections\/power-modules-pdbs\/products\/pm02d-power-module\"\u003ePM02D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/holybro.com\/collections\/standard-gps-module\/products\/m10-gps?variant=42991226192061\"\u003eM10 GPS Module\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/shop.holybro.com\/sik-telemetry-radio-v3_p1103.html\"\u003eSiK Telemetry Radio V3  433\/915MHz\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/shop.holybro.com\/x500-v2-kit_p1288.html\"\u003eX500 V2 Frame Kit \u003c\/a\u003e(SKU30120)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePreinstalled Items:\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/shop.holybro.com\/spare-parts-x500-v2-kit_p1291.html\"\u003eMotors\u003c\/a\u003e - Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug (Motor Specification can be found\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/X500MotorSpec.png?v=1678791632\" target=\"_blank\"\u003ehere\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/shop.holybro.com\/spare-parts-x500-v2-kit_p1291.html\"\u003eESCs\u003c\/a\u003e - BLHeli S ESC 20A (4 pcs) with XT30 Plugs - Compatible with 4S Battery\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/shop.holybro.com\/spare-parts-x500-v2-kit_p1291.html\"\u003e\u003cspan\u003e1045 Propellers (6 pcs) with retainer\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"http:\/\/shop.holybro.com\/spare-parts-x500-v2-kit_p1291.html\"\u003ePower Distribution Board\u003c\/a\u003e (XT60 plug for battery \u0026amp; XT30 plug for ESCs \u0026amp; peripherals)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOther Optional Items (Sold Seperately) \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/holybro.myshopify.com\/products\/radiomaster-tx16s\" target=\"_blank\"\u003e\u003cspan\u003eRadioMaster TX16S RC Controller\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/holybro.myshopify.com\/products\/radiomaster-r81-receiver\" target=\"_blank\"\u003e\u003cspan\u003eRadioMaster R81 Receiver\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/holybro.com\/collections\/multicopter-kit\/products\/spare-parts-s500-v2-kit?variant=41591094411453\"\u003e\u003cspan\u003eDepth Camera Mount\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003ca href=\"http:\/\/shop.holybro.com\/x500-v2-kit_p1288.html\"\u003e\u003cu\u003e\u003cstrong\u003eX500 V2 Frame Kit Details (SKU30120):\u003c\/strong\u003e\u003c\/u\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBody - Full Carbon Fiber Top \u0026amp; Bottom plate (144 x 144mm, 2mm thick)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eArm - High strength \u0026amp; ultra-lightweight 16mm carbon fiber tubes with newly designed fiber-reinforced nylon connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLanding gear - 16mm \u0026amp; 10mm diameter carbon fiber tubes with strengthened \u0026amp; improved plastic tee connectors.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlatform board - With mounting holes for GPS \u0026amp; popular companion computer such as the Raspberry Pi 4 \u0026amp; Jetson Nano\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNewly added propeller retainer to prevent fly offs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual 10mm Ø rod x 250 mm long rail mounting system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBattery mount with two Battery Straps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHand tools for installation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cu\u003e\u003cstrong\u003eMechanical Specification:\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWheelbase: 500mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor mount pattern: 16x16mm \u0026amp; 19x19mm\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFrame Body: 144x144mm, 2mm thick\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLanding gear height: 215mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpace between top and bottom plates: 28mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 610g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFlight time: ~18 minutes hover with no additional payload. Tested with 5000mAh Battery.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePayload: 1500g (without Battery, 70% Throttle)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBattery Recommendation: 4S 3000-5000mAh 20C+ with XT60 Lipo Battery (Not Included)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/X500MechanicalSpec_480x480.png?v=1678797122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"X500 v2 Assembly Guide\" href=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0604\/5905\/7341\/files\/X500_V2_Assembly_Guide_en.pdf?v=1720853913\"\u003eX500 v2 Assembly Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/X500MotorSpec.png?v=1678791632\" target=\"_blank\"\u003eMotor specification \u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e3D Print \u0026amp; Frame CAD file:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/Holybro_X500_V2_3D_Print.rar?v=1665561017\" target=\"_blank\"\u003eHolybro_X500_V2_3D Print\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/2367252986-files.gitbook.io\/~\/files\/v0\/b\/gitbook-x-prod.appspot.com\/o\/spaces%2FLIgtGDAvVGkCKGOJb1bR%2Fuploads%2F8i7OGwxNrtr6nOP4BgQ0%2Fx500v2-frame.step?alt=media\u0026amp;token=c06776fd-bd31-40e5-aaa3-9fb56c6ccf5a\"\u003e3D CAD File \u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eSetup Guide:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/idorobotics.com\/2023\/07\/20\/open-source-drone-development\/\" target=\"_blank\"\u003eidorobotics Article\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePX4 Setup Guide\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/27rbxCeCq4Y\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eArdupilot Setup Guide\u003c\/p\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_ketmb8u2UI\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003ePropeller retainer installation guide:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/prop_retain_inst.jpg?v=1762479463\" alt=\"\"\u003e\u003cbr\u003eSome Tips:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/A8MINI_1_480x480.jpg?v=1680860555\" alt=\"\" width=\"400\" height=\"400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/A8MINI_2_480x480.jpg?v=1680860564\" alt=\"\" width=\"400\" height=\"400\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":54222353105264,"sku":"15AJ01","price":654.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1126\/9610\/files\/30199-1.webp?v=1787644380","url":"https:\/\/newbeedrone.com\/products\/holybro-x500-v2-kit-pixhawk-6x-standard-set-m10-gps-915mhz-radio","provider":"NewBeeDrone","version":"1.0","type":"link"}