NEW ANNOUNCEMENT: Free domestic shipping on $50+ orders
0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping

    What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, we just did it...

    This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let's go! DJI Plug&Play plug and so many UARTs most people wouldn't even use em' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!

    Top Features:

    Vista digital system Plug-and-Play (VBat passthrough)

    MCU: BGA-STM32H743 , 480MHz

    OSD: AT7456E

    Gyro: MPU6000

    Blackbox: 16Mb Onboard Flash

    BEC output: 5V 2.5A

    Barometer: DPS310

    Safety reminder:

    The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug-in your DJI Air Unit directly when you're flying 6S, because this would fry it! BEC to add for your 6S build can be found here: https://shop.iflight-rc.com/index.php?route=product/product&product_id=747

    Small motor 4S builds should usually need an additional capacitor of at least 16V/220uF, for 6S go up to 35V or even 50V. Bigger motors have a bigger current draw, higher voltage spikes and more serious back EMF (motor braking, works like a generator). Make sure to add big enough or even bigger low ESR capacitors on the AIO battery pad or on your battery lead the more aggressive motors you fly. There's a choice of capacitors in the package, but it's never a bad idea to make sure to protect your board. Smaller boards have less capacitance which has to be covered with external capacitors, there's no way around.

     

    FC // Beast H7 AIO

    Specification:

    MCU: BGA-STM32H743

    Gyro: MPU6000

    Blackbox: 16Mb Onboard Flash

    BEC output: 5V 2.5A 

    Barometer: DPS310

    Micro-USB

    OSD: AT7456E

    Uart:5 (UART1、UART2、UART3、UART4、UART7)

    FC Firmware:IFLIGHT_H743_AIO

    Mounting pattern: 25.5*25.5mm φ3mm

    Dimensions: 32.5*32.5mm

    Weight: 8.8g

     

    ESC // 55A 2-6S

    Specification:

    Uarts: 5

    Current Sensor: Yes

    Input: 2-6S LIPO

    Current scale: 200

    Constant: 55A / Burst: 60A

    BLHeli: BLHeli-S

    Telemetry: no

    ESC Firmware: BlheliS G-H-30

    Mounting pattern: 25.5*25.5mm/Φ3mm

    Dimensions: 32.5*32.5mm

     

    Package Includes:

    - Beast H7 AIO × 1

    - Capacitor 470uF/16V x 1

    - Capacitor 470uF/35V x 1

    - XT60 12AWG cable 100mm x 1

    - XT30U 18AWG cable 70mm x 1

    - 14AWG Silicone Cable Red 100mm x 1

    - 14AWG Silicone Cable Black 100mm x 1

    -1.0-7P cable 50mm-28mm x 1

    -1.0-7P cable 50mm x 1

    - M2 silicon grommets x 4

    - M2*12mm screws x 8

    - M2 Transparent Nylon Nut x 8

    - 0.8mm black Heat shrink tube 10mm x 8

    Customer Reviews

    Based on 2 reviews
    50%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    50%
    (1)
    W
    W.o.Q.
    The Wizard has spoken

    I've only flown it a couple times and it flies great straight out of the box. Easy to hook up and aio makes a clean build.

    J
    J.R.
    Complete fail.

    Soldering iflight 2005 zing 1900kv and one of 4 channels is smoking every motor applied. Quality control issue? Have requested help on warranty and have gotten nothing back

    Related Products

    View more
    Route Shipping Protection
    From $ 0.98