iFlight Nazgul Evoque F5D Analog BNF- RaceCam R1 Mini 1200TVL
Lightweight Side Panels - Keep Your Rig Clean
Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well.. These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.
Secured Integrated XT60 Battery Plug - As Safe, It Can Be
Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.
High-Performance Electronics - F7 45A Power Stack
Our SucceX Mini F7 flight control, modern USB type-C plug, 16MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new SucceX Mini 45A ESC packed with high performance Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise besides a pre-installed capacitor on the battery lead.
XING-E Pro Performance Motors
Aluminum unibell, 5mm steel alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency.
Illumination - Let It Be Green
360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night's race.
SucceX Force 600mW - Analog Reliable Power
Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn't hop off in wild crashes.
- Total Dimensions: 166*139mm (body dimension)
- Geometry: DeadCat
- Bottom to top distance: 28mm
- Arm Thickness: 6mm
- Bottom plate thickness: 2.5mm
- Top plate thickness: 2mm
- Upper(middle) plate thickness: 3mm
- FC // SucceX- E Mini F7
- ESC // SucceX Mini 45A BLHeli32
- XING-E Pro 2207 4S
- Nazgul F5 propellers
- Weight: 392.6g (without battery and GoPro mount)
I installed this GPS and now I can't get my drone to fly. The whole set up process messed up all my settings in BF. AS soon as I turn on the drone, the OSD says I have 14 sats. I can't get all the OSD functions to work in my goggles, even though I rooted with WTFOS. This is my first time installing a GPS in a drone and the thing came with absolutely no instructions. There are lots of YT vids showing how to set it up, but none show how to trouble shoot. Spent three days trying to get this to work, now I have a fancy paper weight.