• Description

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! 

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. It also features the Caddx Polar Vista, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers. 

Note: Battery, GoPro, and GoPro mount NOT included

 

Features

  • No Props or frame in view!
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Caddx Polar Vista compatible with DJI Digital FPV
  • Butter smooth 2203.5 3600KV (4S)
  • Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

  • Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out this  linked article: "Firmware/Factory Dumps"
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"

Specifications

  • Board Beast Whoop F7 AIO 45A 
  • Motor: XING 2203.5 3600KV (4S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 348.3g (without battery)

FC // Beast F7 AIO

 

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • UARTs: 5
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

 

ESC // 45A 2-6S

  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

    Includes

    • 1 x ProTek35 Frame
    • 1 x Caddx Polar Camera
    • 1 x Caddx Vista
    • 2 x TPU camera side plate soft mount
    • 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
    • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
    • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
    • 1 x GoPro TPU bottom stand black (GoPro Protector not included)
    Description

    After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! 

    iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. It also features the Caddx Polar Vista, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers. 

    Note: Battery, GoPro, and GoPro mount NOT included

     

    Features

    • No Props or frame in view!
    • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
    • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
    • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
    • Low Resonance frame construction (Less Jello, more Cinematic footage)
    • Caddx Polar Vista compatible with DJI Digital FPV
    • Butter smooth 2203.5 3600KV (4S)
    • Pre-tuned with smooth freestyle settings

    Pre-Tuned & Pre- Setup

    • Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
    • To restore lost tunes or updates, please check out this  linked article: "Firmware/Factory Dumps"
    • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
    • Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"

    Specifications

    • Board Beast Whoop F7 AIO 45A 
    • Motor: XING 2203.5 3600KV (4S)
    • Wheelbase: 151mm
    • Body Size: 118*94.5mmmm
    • Bottom plate thickness: 3.5mm
    • Top plate thickness: 2mm
    • Top and bottom plate spacing: 20mm (aluminum standoff height)
    • Propeller size: 3.5 inch
    • FC pattern: 25.5*25.5mm / 20*20mmmm
    • FPV cam spacing: 20mm
    • Weight: 348.3g (without battery)

    FC // Beast F7 AIO

     

    • MCU: BGA-STM32F745
    • Gyro: MPU6000
    • UARTs: 5
    • Blackbox: 8Mb Onboard Flash
    • BEC output: 5V 2.5A
    • Barometer: BMP280
    • Connector: Micro-USB
    • OSD: AT7456E
    • FC Firmware:IFLIGHT_F745_AIO
    • Mounting pattern: 25.5*25.5mm φ3mm
    • Dimensions: 32.5*32.5mm
    • Weight: 8.5g

     

    ESC // 45A 2-6S

    • Current Sensor: Yes
    • Input: 2-6S LIPO
    • Current scale: 200
    • Constant: 45A / Burst: 50A
    • BLHeli: BLHeli-S
    • RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
    • Telemetry: no
    • ESC Firmware: BlheliS G-H-30
    • Mounting pattern: 25.5*25.5mm/Φ3mm
    • Dimensions: 32.5*32.5mm

      Includes

      • 1 x ProTek35 Frame
      • 1 x Caddx Polar Camera
      • 1 x Caddx Vista
      • 2 x TPU camera side plate soft mount
      • 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
      • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
      • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
      • 1 x GoPro TPU bottom stand black (GoPro Protector not included)

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)