The SucceX 60A Plus V2.1 32bit BL Dshot 1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051 MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.
Standard 30.5*30.5 Φ3mm mounting holes; Vibration and impact can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy fixes or adjustments; Countersunk holes on the soldering pad enable each layer board can be powered.
Excellent hardware, optimized circuit, and high-performance components enable SucceX 60A V2.1 Plus 4in1 ESC to respond efficiently. All in all, it brings faster-responding speed and smoother flying experience!
- 8 layers single-board stacking PCB board;
- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
- 32bit G071 MCU,48mHz running speed;
- TDK MLCC Low ESR ceramic capacitors;
- Top grade metal MOSFET;
- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.
- V2.0 - V2.1:
- Before MCU F051 changed to G071
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight: 14.3g
- Supports 2-6S lipo input
- Constant: 60 Amps
- Burst: 65 Amps
- Current sensor: Yes
- Current sensor scale: 100 (1/10th mV/A)
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
- Target: iFlight_G071_4in1
- SucceX 60A V2.1 4-in-1 ESC * 1pc
- Power cables & ESC signal wires * 1set