• Description

iFlight SucceX Whoop AIO V2

TOP FEATURES:

  • Power supply: 1S
  • Super light only 4.8g with VTX and battery plug
  • MCU:STM32F411
  • Gyro: MPU6000
  • Support BLHeliSuite programmable
  • 5A continuous current
  • Built-in VTX
  • Built-in D8 Receiver

Specifications

  • Size:29*29mm
  • Mounting pattern: 25.5*25.5mm/φ3mm (half-hole)
  • Connector:Micro-USB
  • Weight: 4.8g (with power cable, VTX, and VTX antenna)
  • MCU:STM32F411
  • Gyro:MPU6000
  • Blackbox:no
  • BEC output:5V 1.2A
  • INA pad:n uart2
  • Barometer:no
  • FC Firmware:MatekF411RX
  • NOTE: F.PORT protocol RX input support, telemetry not supported.

ESC Specifications

  • Current: 5A continuous and peak 6A
  • Current scale: 400
  • Input:1S
  • Signal Support: Dshot,Oneshot,Multishot
  • Current sensor:yes
  • BLHeli:BLHeli-S
  • ESC Telemetry:no
  • ESC Firmware:O_H_05 16.8

VTX Specifications

  • Input voltage: 5V
  • Channels: 48CH
  • Power: PIT/25/50mW
  • Connector: UFL/IPEX
  • Protocol: Smart audio

Package Includes:

  • 1 x SucceX F4 V2 1S 5A Whoop F4 AIO Board V2 (MPU6000)
  • 1x Whip antenna
Description

iFlight SucceX Whoop AIO V2

TOP FEATURES:

  • Power supply: 1S
  • Super light only 4.8g with VTX and battery plug
  • MCU:STM32F411
  • Gyro: MPU6000
  • Support BLHeliSuite programmable
  • 5A continuous current
  • Built-in VTX
  • Built-in D8 Receiver

Specifications

  • Size:29*29mm
  • Mounting pattern: 25.5*25.5mm/φ3mm (half-hole)
  • Connector:Micro-USB
  • Weight: 4.8g (with power cable, VTX, and VTX antenna)
  • MCU:STM32F411
  • Gyro:MPU6000
  • Blackbox:no
  • BEC output:5V 1.2A
  • INA pad:n uart2
  • Barometer:no
  • FC Firmware:MatekF411RX
  • NOTE: F.PORT protocol RX input support, telemetry not supported.

ESC Specifications

  • Current: 5A continuous and peak 6A
  • Current scale: 400
  • Input:1S
  • Signal Support: Dshot,Oneshot,Multishot
  • Current sensor:yes
  • BLHeli:BLHeli-S
  • ESC Telemetry:no
  • ESC Firmware:O_H_05 16.8

VTX Specifications

  • Input voltage: 5V
  • Channels: 48CH
  • Power: PIT/25/50mW
  • Connector: UFL/IPEX
  • Protocol: Smart audio

Package Includes:

  • 1 x SucceX F4 V2 1S 5A Whoop F4 AIO Board V2 (MPU6000)
  • 1x Whip antenna

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John Healy
You can remove the camera connector to expose pads.

To anyone wondering, you can remove the camera connector to expose the pads. They included an extra set of pads for the camera aside from the pin connectors for people with that intent. I wish they'd add that to the description as it seems like a big selling point. The orientation of the connector on the VTX is a bit weird with it coming out the back, and will definitely affect what canopies you're able to use. I got the goober canopy to go with mine and ended up needing to snip the rear tab off so it would fit. Being able to direct solder resulted in a cleaner build and also took a gram off AUW.