The iFlight Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter that comes with the RaceCam R1 FPV Camera and Nazgul 5" 3-blade propellers. This quad is the updated version of the XL5 V5 FPV frame.
The Nazgul5 V2 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! The Nazgul5 V2 is loaded with lots of power; it comes with the XING-E 2207 (6S 1800KV / 4S 2750KV) motors, SucceX-E F7 Flight Controller, SucceX Force 5.8g 800mW VTX Adjustable, SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have!
Note: The color of propellers may vary, the color strap may vary, GoPro and GoPro mount NOT included
Features
5mm arm design for more durability
Easy-Swap arm
LED illuminated Logo
XING-E 2207 motors and NAZGUL 5140 props
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
Specifications
SucceX-E F7 45A flight stack
XING-E 2207 FPV Motor(6S 1800KV / 4S 2750KV)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)
Changelog
May 2021: SucceX-E F4 Stack changed to SucceX-E F7 Stack.
June 2021: Caddx Ratel camera changed to RaceCam R1 Mini camera.
FACTORY SETUP and WIRING DIAGRAM
This BNF comes pre-built and set up with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks to enhance the flight experience.
Reflashed your drone but didn't back up the setup? Messed up the whole tune and want our factory tune back? No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK
FC // SucceX-E F7 Flight Controller
MCU: STM32F22RET6 216MHz
Gyro: MPU6000
Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
OSD: IFLIGHT OSD (AT7456E)
BEC: 5V 2.5A
BlackBox: 16MB
Uart: 4*UART(UART1、UART2、UART4、UART5)
UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
UART2 for Receiver
UART4 for Free
UART5 for ESC Telemetry
4×Dshot/PWM outputs
Smartaudio & IRC Tramp VTX protocol supported
WS2812 led Strip: Yes
Bepper: Yes
Firmware: IFLIGHT_SUCCEX_E_F7
Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
Weight: 6.9g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
Dimension: 40*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 14.4g
Supports 2-6S Lipo input
STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
Current sensor: YES
BEC: NO
Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
Target: G-H-30 BLS 16.7
VTX// SucceX Force 5.8g 800mW VTX Adjustable
The output power is stable;
Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
Output 48 frequency points,
Frequency lock fast, the boot does not interfere with companions;
This is camera is Awesome! Can't wait to mount it in a wing. The formfactor puts in the mind of a HD camera. The lens is big for a camera of this size. It should fit any wing or 3"-5" build you mite be thinking about.
It's an amazing drone, I'm new to this hobby so I had to lower to rates to be able to fly the drone without crashing it. Its set up to race out the box, lol. Sweat deal!