JHEMCU GSF405A is a 1-2S F4 AIO, which also integrates four-in-one brushless ESC and ELRS 2.4G receiver. It has 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface. (The serial port used by SBUS is RX2), the built-in ELRS receiver is the UART1 port, onboard a WS2812 LED light, and a WS2812 interface is reserved. Built-in black box 8MB and barometer, buzzer interface, camera interface. A 5V power supply camera interface is reserved on the board.
Flight control parameters: CPU: STM32F405 Gyroscope/Accelerometer: MPU6000 OSD: AT7456E Barometer: BMP280 Black box: 8MB IIC: Support BEC: 5V UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6 USB: micro usb Size: 25.5*25.5MM M2 Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DS MX Support programmable LED such as WS2812 Support buzzer Built-in voltage and current sensors Weight: 3.3 grams
ELRS RX parameters: Frequency: 2.4GHZ Working Agreement: CRSF (Betaflight) Firmware: DIY_2400_RX_ESP8285_SX1280 ELRS receiver indicator status: Double flash: code matching mode Slow flashing: No transmission signal received Steady on: Received transmit signal
Linking steps: 1. Connect USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.
JHEMCU GSF405A is a 1-2S F4 AIO, which also integrates four-in-one brushless ESC and ELRS 2.4G receiver. It has 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface. (The serial port used by SBUS is RX2), the built-in ELRS receiver is the UART1 port, onboard a WS2812 LED light, and a WS2812 interface is reserved. Built-in black box 8MB and barometer, buzzer interface, camera interface. A 5V power supply camera interface is reserved on the board.
Flight control parameters: CPU: STM32F405 Gyroscope/Accelerometer: MPU6000 OSD: AT7456E Barometer: BMP280 Black box: 8MB IIC: Support BEC: 5V UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6 USB: micro usb Size: 25.5*25.5MM M2 Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DS MX Support programmable LED such as WS2812 Support buzzer Built-in voltage and current sensors Weight: 3.3 grams
ELRS RX parameters: Frequency: 2.4GHZ Working Agreement: CRSF (Betaflight) Firmware: DIY_2400_RX_ESP8285_SX1280 ELRS receiver indicator status: Double flash: code matching mode Slow flashing: No transmission signal received Steady on: Received transmit signal
Linking steps: 1. Connect USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.
