• Description

Specifications:

Brand Name: JHEMCU

Item Name: RX24T RC Receiver

Model: RX24T

Weight: 0.6g(without antenna)

Size: 11*18*3 mm

2.4G ISM type

ESP8285 MCU

SX1280IMLTRT RF

Frequency range: 2400 MHz To 2500 MHz

Maximum receiving refresh rate: 500Hz

Minimum receiving refresh rate: 25Hz

Working voltage: 5V

Peak gain: 3.16dB

RX24T: Half-wave dipole omnidirectional T-shaped antenna


Linking Binding steps:

- After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.

- After the 2.4G ELRS tuner module and the remote control are correctly connected, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation.

- After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time.


Indicator status:

Double flash: code matching mode

Slow flashing: No transmission signal is received

Steady on: receive the transmit signal

Fast flashing: WIFI upgrade mode


Package Include:

1 x RX24T RC Receiver

1 x T antenna

4 x Wire

Description

Specifications:

Brand Name: JHEMCU

Item Name: RX24T RC Receiver

Model: RX24T

Weight: 0.6g(without antenna)

Size: 11*18*3 mm

2.4G ISM type

ESP8285 MCU

SX1280IMLTRT RF

Frequency range: 2400 MHz To 2500 MHz

Maximum receiving refresh rate: 500Hz

Minimum receiving refresh rate: 25Hz

Working voltage: 5V

Peak gain: 3.16dB

RX24T: Half-wave dipole omnidirectional T-shaped antenna


Linking Binding steps:

- After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.

- After the 2.4G ELRS tuner module and the remote control are correctly connected, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation.

- After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time.


Indicator status:

Double flash: code matching mode

Slow flashing: No transmission signal is received

Steady on: receive the transmit signal

Fast flashing: WIFI upgrade mode


Package Include:

1 x RX24T RC Receiver

1 x T antenna

4 x Wire

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Eyal M
Jhemcu rx

Tiny and works great