• Description

Description

FIXED

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

UPDATE

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

ADDED

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

SPECIFICATION:

  • Mamba Basic F722 MINI MK3 FC
  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000
  • Barometer: Yes
  • OSD: Yes
  • Blackbox: 16M Flash Memory
  • Uarts: 6 Set
  • ESC Soft: Dshot300/600/1200
  • ESC Telemetry: Yes
  • Power Led: Yes
  • LED Controller:BF LED
  • F.Port: Yes
  • RSSI: Yes
  • Buzz: Yes
  • Input: 2~6S Lipo (8.4~25.2V)
  • TVS Protection: Yes
  • BEC:3.3V 0.5A&5V 2.5A
  • MOUNTING: 20mm,M2

Diagram Link From Help Centre Link

      Description

      Description

      FIXED

      • Add I2C function
      • When you connect the USB, the receiver and OSD settings can be saved
      • Increase the pad area
      • LED signal selection (when Mamba Led sys avaiable)
      • BEC short circuit protection
      • TVS instant high voltage protection 30V

      UPDATE

      • Upgrade the anti-interference cable
      • Use Typec(Most)
      • The pad area of the Mini flight controller (20×20) increased by 140%

      ADDED

      • Add self-recovery insurance to the receiver's 5V power supply.
      • Increase the camera VCC power supply pad.
      • The standard flight controller (30.5×30.5) adds a spare pad.
      • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

      SPECIFICATION:

      • Mamba Basic F722 MINI MK3 FC
      • MCU: 216MHz STM32F722RET6
      • IMU: MPU6000
      • Barometer: Yes
      • OSD: Yes
      • Blackbox: 16M Flash Memory
      • Uarts: 6 Set
      • ESC Soft: Dshot300/600/1200
      • ESC Telemetry: Yes
      • Power Led: Yes
      • LED Controller:BF LED
      • F.Port: Yes
      • RSSI: Yes
      • Buzz: Yes
      • Input: 2~6S Lipo (8.4~25.2V)
      • TVS Protection: Yes
      • BEC:3.3V 0.5A&5V 2.5A
      • MOUNTING: 20mm,M2

      Diagram Link From Help Centre Link

          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)