• Description

#All H7 uses Development version 4.3 Target temporarily

FC Specifications

MAMBA MK4 H743
MCU: 480MHz STM32H743
GYRO: MPU 6 Series DUAL /BMI270 (Optional)
Barometer: Yes
OSD: Yes
Blacbox: 128M Flash Memory
Uarts: 8Set
ESC Signal:8Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: Yes
Power Led: Yes
LED Controller:BF LED/MB LED(4 Set 2812 LED)
F.Port: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm,M3

ESC Specifications
MAMBA F65_128K
NPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:55A×4
BURST CURRENT:65A (10S)
BEC: No
Target: BLHeli_32 MAMBA F65_128K
SOFT: Dshot300/600/1200
PWM: 24~128K
TVS Protection: Yes
MOUNTING: 30.5mm/M3



Supply :
High Frequency 470uF/35V ×1
8pin sh1.0 ×2
12AWG 100mm ×2
AMASS Original XT60

    Description

    #All H7 uses Development version 4.3 Target temporarily

    FC Specifications

    MAMBA MK4 H743
    MCU: 480MHz STM32H743
    GYRO: MPU 6 Series DUAL /BMI270 (Optional)
    Barometer: Yes
    OSD: Yes
    Blacbox: 128M Flash Memory
    Uarts: 8Set
    ESC Signal:8Set
    ESC Soft: Dshot300/600/1200
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller:BF LED/MB LED(4 Set 2812 LED)
    F.Port: Yes
    Buzz: Yes
    Input: 3~6S Lipo (12.6~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A& 5V 3A (System Power)&
    5V 3A(LED)& 9V 3A
    MOUNTING: 30.5mm,M3

    ESC Specifications
    MAMBA F65_128K
    NPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
    CONTINUE CURRENT:55A×4
    BURST CURRENT:65A (10S)
    BEC: No
    Target: BLHeli_32 MAMBA F65_128K
    SOFT: Dshot300/600/1200
    PWM: 24~128K
    TVS Protection: Yes
    MOUNTING: 30.5mm/M3



    Supply :
    High Frequency 470uF/35V ×1
    8pin sh1.0 ×2
    12AWG 100mm ×2
    AMASS Original XT60

      Customer Reviews

      Based on 2 reviews
      50%
      (1)
      0%
      (0)
      50%
      (1)
      0%
      (0)
      0%
      (0)
      j
      jack johnsn
      Bad gryo

      I am a diatone guy for sure...this stack I was super excited about the esc is awesome and the h7 board layout is perfect but I'd recommend getting the mpu6000 gyro the bmi Bosch gyro either had a defect or just is no good idk exactly but was running at 3.2k pid like recommended and just couldn't tune out very irratic throbbles and was very unstable on a 7".

      E
      Enrique
      Recommended

      Excellent stack like all Mamba components, reliable product, easy to solder and with many features... high expectations of the new processor and the latest bosch gyroscope. Thank you very much NewBeeDrone !