• Description

The AcroBee75 BNF build with BeeBrain BLV3 ! 

The AcroBee75 Bind and Flight is finally here! The AcroBee75 uses the cockroach75 frame and the Azi 40mm propeller. The performance of the AcroBee75 setup is even more efficient than that of the AcroBee65. The larger-sized frame and propeller provide more control to help create that efficiency. With the same KV motor and same 300mah battery, its flight time is similar to that of the AcroBee65. If you love to fly outdoors, the AcroBee75 is the option for you. 

BeeBrain BLV3 Flight Controller: 

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built-in FrSky Receiver and built-in video transmitter.

In addition, the ESC MOSFETs have been upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC have been enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range

  1. Optimized SPI Receiver hardware to improve efficiency within the receiver
  2. Removable antennas
  3. Additional low-noise amplifier to increase range
  4. Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc.)

Video Transmitter Improvements - 120mW

  1. New heatsink and layout to increase heat dispersion and efficiency
  2. Increased transmitting power from 25mW to 120mW (V2)

Optional External Receiver

If you would like to install an external receiver, you will need to purchase this 4 pin JST cable. Click here for the manual to install an external receiver.

Suggested Accessories

Additional Information

Recommended battery: NewBeeDrone Nitro Nectar Gold 300mAh

Betaflight 4.2.9 Tuned Firmware Download





Build Components

BeeBrain BLV3 Flight Controller Specifications

  • STM32F411 MCU
  • ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable
  • ESC Specifications: 4 channel 12A ESC
  • Weight: 6 grams (including antennas and battery connector)
  • Size: Outer dimensions 29 x 29 x 7.6 mm
  • Holes: 25.5 x 25.5 mm
  • Battery input: 1 – 2 S
  • UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.

Includes

  • 1x AcroBee75 BLV3 BNF

Description

The AcroBee75 BNF build with BeeBrain BLV3 ! 

The AcroBee75 Bind and Flight is finally here! The AcroBee75 uses the cockroach75 frame and the Azi 40mm propeller. The performance of the AcroBee75 setup is even more efficient than that of the AcroBee65. The larger-sized frame and propeller provide more control to help create that efficiency. With the same KV motor and same 300mah battery, its flight time is similar to that of the AcroBee65. If you love to fly outdoors, the AcroBee75 is the option for you. 

BeeBrain BLV3 Flight Controller: 

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built-in FrSky Receiver and built-in video transmitter.

In addition, the ESC MOSFETs have been upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC have been enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range

  1. Optimized SPI Receiver hardware to improve efficiency within the receiver
  2. Removable antennas
  3. Additional low-noise amplifier to increase range
  4. Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc.)

Video Transmitter Improvements - 120mW

  1. New heatsink and layout to increase heat dispersion and efficiency
  2. Increased transmitting power from 25mW to 120mW (V2)

Optional External Receiver

If you would like to install an external receiver, you will need to purchase this 4 pin JST cable. Click here for the manual to install an external receiver.

Suggested Accessories

Additional Information

Recommended battery: NewBeeDrone Nitro Nectar Gold 300mAh

Betaflight 4.2.9 Tuned Firmware Download





Build Components

BeeBrain BLV3 Flight Controller Specifications

  • STM32F411 MCU
  • ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable
  • ESC Specifications: 4 channel 12A ESC
  • Weight: 6 grams (including antennas and battery connector)
  • Size: Outer dimensions 29 x 29 x 7.6 mm
  • Holes: 25.5 x 25.5 mm
  • Battery input: 1 – 2 S
  • UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.

Includes

  • 1x AcroBee75 BLV3 BNF

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Tharp
Almost Perfect

The AcroBee75 flies exactly like the 65mm but better in every way. It is a little faster, a little more stable and a lot more fun. My only concern is the tpu battery mounting system. The front slot popped off of the screws within a couple of batteries, and both are just a bit too tight for anything other than a perfect battery. They also seem a bit too thick on the bottom, and press the battery into the frame with enough force to bend batteries. My easy fix was to use a rubberized piece, glued to the inside of the frame, over the NewBeeDrone logo. With that, this has been the best flying micro, out of the box, yet... and I've flown a few.