The AcroBee75 BNF build with BeeBrain BLV3 ! 

The AcroBee75 Bind and Flight is finally here! The AcroBee75 uses the cockroach75 frame and the Azi 40mm propeller. The performance of the AcroBee75 setup is even more efficient than that of the AcroBee65. The larger-sized frame and propeller provide more control to help create that efficiency. With the same KV motor and same 300mah battery, its flight time is similar to that of the AcroBee65. If you love to fly outdoors, the AcroBee75 is the option for you. 

BeeBrain BLV3 Flight Controller: 

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built-in FrSky Receiver and built-in video transmitter.

In addition, the ESC MOSFETs have been upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC have been enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range

  1. Optimized SPI Receiver hardware to improve efficiency within the receiver
  2. Removable antennas
  3. Additional low-noise amplifier to increase range
  4. Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc.)

Video Transmitter Improvements - 120mW

  1. New heatsink and layout to increase heat dispersion and efficiency
  2. Increased transmitting power from 25mW to 120mW (V2)

Optional External Receiver

If you would like to install an external receiver, you will need to purchase this 4 pin JST cable. Click here for the manual to install an external receiver.

Suggested Accessories

Additional Information

Recommended battery: NewBeeDrone Nitro Nectar Gold 300mAh 2S HV LiPo Battery with GNB27

Betaflight 4.2.9 Tuned Firmware Download





Build Components

BeeBrain BLV3 Flight Controller Specifications

  • STM32F411 MCU
  • ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable
  • ESC Specifications: 4 channel 12A ESC
  • Weight: 6 grams (including antennas and battery connector)
  • Size: Outer dimensions 29 x 29 x 7.6 mm
  • Holes: 25.5 x 25.5 mm
  • Battery input: 1 – 2 S
  • UART2 TX and RX free for external receiver (un-inverted SBus signal only)
  • GNB27 Battery Connector

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.


Includes

  • 1x AcroBee75 BLV3 BNF

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
25%
(1)
0%
(0)
0%
(0)
B
Bob
great little ripper!!

i got this for christmas and love it for ripping around indoor and out!!

J
James S.
AcroBee75 2S

I'm absolutely loving the new 2S AcroBee75! Great outdoor flyer with better throttle control and agility, as long as it's not windy. Great new product NewBeeDrone!! How would an xt30 2S perform?

D
Daniel Meyer

Unfortunately, the shipping and the customs fee are much too expensive and cost me 70 Fr.
Too bad I only order from you because I can only get the good products from you

M
Mark
Great out of the box

Purchased this to do a little outdoor flying. Awesome backyard flyer. Range is good enough to go park flying. Great tune right out of the box. Others had said the camera is dark but mine is ok not the greatest. I might replace with Ant lite. The quality of equipment is second to none. You have a new customer. I will be buying more NewBee products that's for sure.