Pix32 is an advanced autopilot system designed by the PX4 open-hardware project. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The benefits of the Pix32 system include integrated multi-threading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. The Pix32 allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.
The flagship Pix32 module will be accompanied by new peripheral options, including a digital airspeed sensor, support for an external multi-color LED indicator and an external magnetometer. All peripherals are automatically detected and configured.
Ublox NEO-M8N GPS
This new design incorporates the HMC5883L digital compass, using the Ublox latest 8series module providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts. The units ship pre-configured for use with Pix32
The NEO-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 GNSS GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS) engine in the industry proven NEO form factor.The NEO-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The NEO-M8M is optimized for cost sensitive applications, while NEO-M8N and NEO-M8Q provide best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations.
Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
The NEO-M8 combines a high level of robustness and integrationcapability with flexible connectivity options. The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems. This makes NEO-M8 perfectly suited to industrial and automotive applications.The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules. For RF optimization the NEO-M8N/Q features an additional front-end
LNA for easier antenna integration and a front-end SAW filter for increased jamming immunity
This module ships with a baud rate of 38400, 10Hz
FPV Radio Telemetry Set
This Radio Telemetry kit offers a great low price, longer range (approx one mile with supplied antennas) and superior performance. The system utilizes 433Mhz (or 915Mhz) band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware
The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.
Kick your mission planning into real time with Radios, featuring interchangeable air and ground modules, Android tablet compatibility, and protective cases. Radios allow your ground station computer to communicate with your vehicle wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning.915MHz and 433MHz available.
Interface to the module is via standard 5V-tolerant TTL serial / FT230 USB serial.
- Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- Multicolor LED indicator
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
- 14 PWM / Servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)
- Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply (fixed-wing use)
- Backup system integrates mixing, providing consistent autopilot and manual override mixing modes (fixed wing use)
Ublox NEO-M8N GPS
- ublox Neo-M8N module
- Industry leading -167 dBm navigation sensitivity
- Navigation update rate up to 10 Hz
- Cold starts: 26s
- LNA MAX2659ELT+
- 25 x 25 x 4 mm ceramic patch antenna
- Rechargeable 3V lithium backup battery
- Low noise 3.3V regulator
- Power and fix indicator LEDs
- Protective case
- 30cm Pix32 2.4 compatible 6-pin and APM compatible 5-pin 2 types cable included
- Diameter 60mm total size
- 32 grams with case
FPV Radio Telemetry Set
- Interchangeable air and ground modules
- Micro-USB port
- -117 dBm receive sensitivity
- 6-position Molex connector
- 500 mW maximum output power (adjustable)
- SMA connector
- 2-way full-duplex communication through adaptive TDM
- UART interface
- Transparent serial link
- MAVLink protocol framing
- Frequency Hopping Spread Spectrum (FHSS)
- Configurable duty cycle
- Error correction corrects up to 25% of bit errors
- Open-source SIK firmware
- Configurable through Mission Planner and APM Planner
- Supply voltage: 3.7-6 VDC (from USB or Molex connector)
- Transmit current: 500 mA at 27 dBm
- Receive current: 25 mA
- Serial interface: 3.3 V UART
- 1x Pix32 autopilot
- 1x Buzzer
- 1x Power module with XT60 connectors and 6-position connector cable
- 1x Extra 6-position cable
- 1x Micro USB cable
- 1x SD card and USB adapter
- 1x 3-wire servo cable
- 1x Safety switch
Ublox NEO-M8N GPS
- 1x NEO-M8 with compass module and case set
- 1x Pix32 compatible 6pin cable
- 1x APM compatible 5pin cable
- 1x 'X' type folding pedestal mount
- 1x carbon rod 100mm & 140mm
FPV Radio Telemetry Set
- 2x Radio modules with antennas
- 1x Micro-USB cable
- 1x Android OTG adapter cable
- 1x 6-wire Pix32 connector cable
- 1x 6-to-5-position APM and PX4 connector cable
We guarantee and stand by all our products that we sell. If for some reason there is an issue with your order please do not hesitate to reach out to us using our store's online contact form, and we will work hard to resolve any issues as best that we can!
All parts are shipped fast from sunny San Diego, California! If you order before 2 p.m. Pacific Standard Time we will ship out your order the same day!
Shipping orders with lipo batteries
We do ship our small 210 mAh Nitro Nectar batteries via air in small quantities around the world.
For all batteries that are greater than 210 mAh, please note that due to US and International laws, we can only send orders with these lipo batteries either via Ground Shipping if shipped within the US, or via air freight method such as UPS or DHL when shipped internationally.
If you select a different shipping method we will hold your order until we get it updated.
Shipping within the USA
For items shipped within the US, we offer low rates via the US Post Office, and most packages shipped with the usual First Class Mail will take no more than 3-5 days to arrive.
For faster service, we also offer low rates with UPS, and can get most packages to arrive within 2 days from our shop to your mailbox!
International Shipping to Countries Outside the USA
It is our policy to mark all international packages with very low customs value so that our international customers do not take a hit when receiving their orders!
Please note that we need a local phone number on all international orders. If one is not present then we will reach out to you first, before sending your package out.
We are pleased to offer very competitive international rates for packages sent all over the world via DHL, which can usually deliver anywhere in the world within 3 days!
We do not yet have full DHL coverage for every region and for all small packages, but we are working hard to expand our rates and coverage! We apologize in advance if you are an international customer and do not see a DHL rate at check out.
We can also ship via the regular Post Office, with packages taking around 15 days to arrive. This is the most inexpensive international shipping method we offer.
What about Free Shipping?
We get this request from our customers a lot, and we are working hard towards our goal of being able to offer Free Shipping for our orders, but we are not quite there yet. We are still a new shop that has only been open for less than a year and we are not quite up to the order volumes required to be able to offer Free Shipping.
But the more awesome customers that we get, such as yourself, the faster we can reach our goal!
How much is it to ship to my home?
Want to see the rate you would get? Its simple! Just add the desired items to your cart and initiate the checkout process. Once you have entered your address you will see the best rates that we can generate for you on the next screen.
Where is my shipment?
We send an email out with a tracking number for every order that we ship! You can log into your account to find a specific order #, and then just search your email inbox for that number to find the tracking email from us!
No Freight Forwarding Addresses: We do not allow orders to be shipped to freight forwarding addresses. We ship internationally to almost any country in the world.
No Hotel Addresses: We do not allow orders to be shipped to hotels. Please provide a permanent street address.
PO Boxes: Shipments to PO Boxes are reviewed on a case by case basis and may be declined.
Refunds: All orders that are declined by us due to any of these rules are voided with your method of payment and the order is canceled.