0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Check Out Continue Shopping

    RekonFPV Rekon6 Ultra Light Long Range Frame Kit

    About RekonFPV: RekonFPV was founded in collaboration between Dave_C and HGLRC. Dave_C is responsible for the lightweight revolution in long range drones! He knows exactly what makes a long range quad great and all of the RekonFPV BNFs and frames show exactly that.


    This six-inch platform is an adaptation of the Rekon 5 to match the new light 6” t-mount props that now entered the market. The main advantage of 6" compared to the 5" version is the ability to carry even higher loads, especially large four cell 21700 Lithium-Ion packs with over 4000mAh for extreme flight times. With its 1500kV 2105.5 motors the quad can be run on 6S for increased power, but it is mainly intended as an ultra-high efficiency cruiser on 4S.

    Frame Design

    The Rekon 6 features an innovative frame design using single-piece front and rear arms locked by an aluminum bolt. The bolt is used to create a strong and stiff center section of the frame, locking the arms and de-coupling forces from the rest of the frame. This allows the use of use very light M2 hardware and thin carbon plates on the other parts of the frame, reducing the overall weight for maximum efficiency. On top of that, the bolt makes it possible to apply much more torque and it's not prone to break or strip like M2 or M3 hardware often does. A lot of attention was also put toward the design of the front and camera mount. Dead cat frames are inherently prone to take heavy impacts in this area since the arms are swept backward and the front is exposed. This is why the Rekon 6 uses a flexible, 3D printed canopy supported by a carbon brace to absorb impact energy and protect the camera in case of a crash.

    Key Features
    - Lightweight frame with 10mm aluminum bolt construction, compact 25/20mm standoff split deck main body for double 20x20 stacks
    - Shock absorbing TPU front with integrated GoPro mount
    - Foldable crossfire immortal T-mount inspired by Alexandre Arvinte (
    - Mild dead cat design reducing the props in view while not affecting flight performance
    - Optional braces for improved vibration dampening and crash resistance
    - Optimized for 2105.5 and 2303 motors with 12x12 M2 mounts
    - GPS mount for M80 GPS
    - External buzzer mount for Soter Buzzer


    RekonFPV Rekon6 frame kit

    • Brand Name: Rekon
    • Model: Rekon6 LR Frame Kit
    • Material: 3K Carbon Fiber
    • Type: 6" frame
    • Wheelbase: 244 mm
    • size: 235*180 mm
    • Top plate: 1.5 mm
    • Bottom plate: 1.5 mm
    • Middle plate: 1.5 mm
    • Unibody Arm: 4 mm
    • Protective bar: 3 mm
    • Top and middle plate space: 20 mm
    • Installation holes: 20x20 mm
    • Support camera: 19*19 mm
    • Motor Installation holes: 12*12 mm
    • Weight: 67.2 g

    Package Includes:

    1x 1.5mm top plate
    1x 1.5mm bottom plate
    1x 1.5mm middle plate
    2x 4mm arms
    2x 3mm protective bars
    2x M2*25mm Screws
    4x M2*20mm Screws
    4x M3*20 Screws
    4x M2*20 Screws
    1x M2*14 Screws
    11x M2*9 Screws
    12x M2*5 Screws
    1x M5*20 Screws
    1x M5 Screws
    1x M5 nut
    2x 7075 Screws
    2x M2*4 Screws
    4x M3 Self-tightening nuts
    5x M2 Self-tightening nuts
    8x M3*8 shock-absorption balls
    4x M2*4 shock-absorption balls
    2x Battery straps 20x200mm
    1x Battery Anti-slip pad
    1x TPU SMA antenna mount
    1x TPU antenna mount
    1x TPU camera mount
    1x TPU naked Gopro mount
    1x TPU GPS mount
    1x TPU buzzer mount
    1x TPU T-shape antenna rotating mount
    1x TPU T antenna mount

    Recommended Parts:( Not Included )

    • Flight Controller: Zeus F722mini
    • Motor: 20xx/21xx
    • ESC: Zeus 25A-40A
    • Camera: 19X19mm
    • Propeller: 6 Inch

    Customer Reviews

    No reviews yet