• Description

speeSpeedyBee has stuffed everything you could ask for into this 30x30 FC.

It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, and more!

Browse all our SpeedyBee products!

 


Features

  • DJI Plug and Play 
  • Built in Wi-Fi and Bluetooth
  • Camera control pad
  • Blackbox
  • 6 Uarts, buzzer pad, and I2C

Specifications

  • MCU: STM32F722
  • IMU: MPU6000
  • USB: Type-C
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE Support, used for Flight Controller configuration
  • WiFi Support, used for data transfer, e.g firmware
  • flashing, and Blackbox analysis.
  • DJI Air Unit plug: A full DJI Air Unit JST slot onboard
  • BlackBox: 16MB onboard dataflash
  • Current Sensor 1 : 10 (Scale 168)
  • BetaFlight Camera Control Pad: Yes
  • Power input: 3S - 6S Lipo
  • 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
  • the maximum load current is 2.5A.
  • 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
  • 4.5V power output 1 * 4.5V output pad
  • 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
  • ESC signal M1 - M4
  • UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
  • ESC Telemetry: UART UART4 RX
  • I2C: Used for external Magnetometer, Sonar, etc.
  • LED: pin Used for WS2812 LED
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer
  • Boot button: Yes
  • RSSI input: Yes
  • SmartPort: Supported
  • Support Flight Controller Firmware BetaFlight(Default), EMUFlight
  • Target: SPEEDYBEEF7V2
  • Mounting: 30.5x30.5mm, 4mm hole size
  • Dimension 41x38x6.9mm
  • Weight 9g

Includes

  • 1x SpeedyBee F7 V2 30x30 Flight Controller for DJI

Description

speeSpeedyBee has stuffed everything you could ask for into this 30x30 FC.

It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, and more!

Browse all our SpeedyBee products!

 


Features

  • DJI Plug and Play 
  • Built in Wi-Fi and Bluetooth
  • Camera control pad
  • Blackbox
  • 6 Uarts, buzzer pad, and I2C

Specifications

  • MCU: STM32F722
  • IMU: MPU6000
  • USB: Type-C
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE Support, used for Flight Controller configuration
  • WiFi Support, used for data transfer, e.g firmware
  • flashing, and Blackbox analysis.
  • DJI Air Unit plug: A full DJI Air Unit JST slot onboard
  • BlackBox: 16MB onboard dataflash
  • Current Sensor 1 : 10 (Scale 168)
  • BetaFlight Camera Control Pad: Yes
  • Power input: 3S - 6S Lipo
  • 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
  • the maximum load current is 2.5A.
  • 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
  • 4.5V power output 1 * 4.5V output pad
  • 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
  • ESC signal M1 - M4
  • UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
  • ESC Telemetry: UART UART4 RX
  • I2C: Used for external Magnetometer, Sonar, etc.
  • LED: pin Used for WS2812 LED
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer
  • Boot button: Yes
  • RSSI input: Yes
  • SmartPort: Supported
  • Support Flight Controller Firmware BetaFlight(Default), EMUFlight
  • Target: SPEEDYBEEF7V2
  • Mounting: 30.5x30.5mm, 4mm hole size
  • Dimension 41x38x6.9mm
  • Weight 9g

Includes

  • 1x SpeedyBee F7 V2 30x30 Flight Controller for DJI

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)