Throwback! These Sunnysky motors are top notch quality. With a stator size of 1103 and 10000KV, this motor will work great on 2s with props ranging from 40mm to 3" in size.
Recommended 3" frame: NewBeeDrone SavageBee 3"
- Stator: 1103
- KV: 10000KV
- Shaft Diameter: 1.5mm
- Mounting Pattern: 9mm X
- Mounting Screw Size: M1.8
- Mounting Screw Length: 4mm
Note: The motor will still mount to any frame with a 9mm X pattern. Although the mounting screw size is smaller than normal, when using all four motor screws the motor does not wiggle.
Can you get these again? They were great for the price
These are pretty nice little motors, i have 3 sets. My main complaint is that nearly every motor the shaft is loose and spinning freely, that makes getting props off a no go. You will have to cut them off. I would recommend getting some green loctite and immediately put some on each shaft. add a very tiny dot where it touches the bell.
These are actually lighter than expected and look pretty similar to Betafpv 1103. No prop screws though so be sure you use props that fit snug.