The TWIG MUTANT 4 is a mutated TWIG frame that we have made some exciting new changes to as we did the new TWIG XL line up of frames . The frame is premium 3mm thick high grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm. The frame is 160mm motor post to motor post and swing up to 4 props. The motor mounting is for 4-hole 9x9 or 12x12 motor mounts. The frame can accommodate a 20x20 stack or a whoop toothpick aio.
With this new frame design we also have provided both standard and toilet tank mounting battery strap slots. The frame also has our TWIG TWIST keyholes, so TPU battery mounts can also be purchased separately for both regular and toilet tank mounting for 2S, 3S, & 4S sized batteries. The TWIG MUTANT 4 uses the same TWIG XL canopies so they can be interchangeable on any of these frame designs. The canopies have 5 to 55 degrees of angle adjustment for any 19x19 micro camera. A 14x14 Nano camera can be also used with a micro camera adapter (not included). The standard canopy has also been designed so that the HappyModel Diamond DVR/VTX or NamelessRC VTX/DVR can be used with it and you can access the SD card and buttons with the way we designed this canopy. You do not have to use a Diamond/VTX as any vtx will work with room to mount on top of the aio or 20x20 stack.
INCLUDED IN KIT
(1) MUTANT 4 T700 Chamfered Frame
(1) Battery Pad
(1) Racer X FPX Battery Strap
(1) TPU Canopy
(4) TPU Arm Guards
(4) TPU Motor Wire Clips
(4) M3x6MM Standoffs
(4) M3x8MM Standoffs
(8) M3x6mm Button Head Screws
(4) M2X16mm Button Head Screws
(8) M2 Black Nylon Nuts
(9) HQ T5X3X2 Props
(10) Packaging & Label.
Description
The TWIG MUTANT 4 is a mutated TWIG frame that we have made some exciting new changes to as we did the new TWIG XL line up of frames . The frame is premium 3mm thick high grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm. The frame is 160mm motor post to motor post and swing up to 4 props. The motor mounting is for 4-hole 9x9 or 12x12 motor mounts. The frame can accommodate a 20x20 stack or a whoop toothpick aio.
With this new frame design we also have provided both standard and toilet tank mounting battery strap slots. The frame also has our TWIG TWIST keyholes, so TPU battery mounts can also be purchased separately for both regular and toilet tank mounting for 2S, 3S, & 4S sized batteries. The TWIG MUTANT 4 uses the same TWIG XL canopies so they can be interchangeable on any of these frame designs. The canopies have 5 to 55 degrees of angle adjustment for any 19x19 micro camera. A 14x14 Nano camera can be also used with a micro camera adapter (not included). The standard canopy has also been designed so that the HappyModel Diamond DVR/VTX or NamelessRC VTX/DVR can be used with it and you can access the SD card and buttons with the way we designed this canopy. You do not have to use a Diamond/VTX as any vtx will work with room to mount on top of the aio or 20x20 stack.
Still able to keep under 250g even with 160x Diatone Toka Motors. the only issue is motor guards are useless as they mount with M2 screws so when they are torqued down they go right thru the guards, material way too playable.
