Finally a quality goggle foam to match the quality of the DJI Goggles.
Overview
Are you tired of the stock DJI goggle foam that leaks light or is just plain uncomfortable? Have you tried other aftermarket DJI goggle foams that don't fit right or make it difficult to breathe from your your nose? We've tried them all too and none of them come close to the quality and comfort of the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles.
Created from Soft Touch NewBeeDrone Comfort Foam, our goggle foam is perfectly sculpted to fit all face shapes. Some foams are too thin and make goggles uncomfortable. Others are too thick and make goggles stick out too far, throwing off the balance and making them feel heavy. The NewBeeDrone Max Comfort Goggles Foam is the perfect compromise at 23mm at its thickest and 14mm at its thinnest. We named them Max Comfort for a reason.
Also included is an optional V Pad to eliminate that last little bit of light leak around the bridge of the nose that plagues some pilots.
Throw out that old, sweaty, ill fitting goggle foam and get the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles.
Highlights
Easy to apply and remove.
Eliminates light leak with included, optional V Pad for the bridge of the nose.
Made out of extra comfortable, Soft Touch NewBeeDrone Comfort Foam.
Perfectly sculpted to fit all faces.
The perfect thickness for comfort and goggle balance.
Specifications
23mm at its thickest.
14mm at its thinnest.
Color: Black, Olive, Dark Turquoise
Included
1x NewBeeDrone Max Comfort Goggle Foam for DJI Goggles
1x Set of Velcro Squares
Are you looking for an upgraded DJI goggle strap to replace that loose fitting, stock goggle strap? Check out FatStraps!
NewBeeDrone Max Comfort Goggle Foam for DJI Goggles V2
C
Chris Bubaker
Goggles 2 foam
The foam doesn't look like it will work out of the box, and after install the nose area looks questionable. However it does all work and fixes all the light leaks, plus is far more comfortable than any other option put there. On e again NewBee drone foams are the only foam to buy. Never waste your money on any other foams.
These batteries performed noticeably better than the other 300mAh and 350 mAh batteries from competitors. If you're leisurely flying, the cheaper batteries will work, but if you want to have more power throughout the charge of the battery, these are better. On the downside, they cost more than the competition. Also, note that I soldered xt30 connectors because that was the connector on the drone we were using. So, I can't comment on the performance on the GNB27 connection
Works great. I've got 3 quads with this receiver now. It seems to be good quality, connected and flashed by wifi after soldering up. Binding went easily with the Radiomaster Pocket and I was off flying.