ImpulseRC Mr. Steele ApexDC 5" FPV 框架套件 - 輕質

APEXDC 與 MR STEELE 合作設計,對經典的「DEAD CAT」幾何結構進行了改進,適用於自由式、攝影和中距離探索。

ImpulseRC Mr Steel Apex DC 5 吋 FPV 車架套件輕型動作射擊

獨特的手臂幾何形狀

ApexDC 是典型「死貓」車架的變體,我們對其進行了修改,以保持前後馬達對齊,從而使我們能夠在馬達佈局中保持備受喜愛的壓縮 x 幾何形狀。

這確保了框架保持平衡並且飛行特性不受影響,這與經典的「死貓」設計不同,後者使後馬達更靠近機身並嚴重影響操控性。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 框架套件輕量級 Deadcat 幾何形狀


透過僅修改上部和下部主機板,我們保留了與常規 Apex 臂的完全相容性,在前面使用標準 5 英吋臂,在後面使用標準 6 英吋臂。

DJI 高清飛行相機的鏡頭中沒有任何道具,對於較慢的電影飛行,現在可以比以前更低的角度運行 GoPro。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕量側邊輪廓


客製化 GOPRO 安裝

為了在拍攝時快速改變角度,沒有多少安裝座可以超越標準的 GoPro 卡舌和插槽設計。然而,GoPro 的庫存螺栓對於 FPV 使用還有很多不足之處。

ImpulseRC Mr Steel ApexDC 5 英吋 FPV 框架套件輕型 3D 列印安裝螺栓


Mr Steele 版本的 ApexDC 不僅包含 3D 列印支架,還包含一個新的客製化設計螺栓,專門用於 FPV 使用。

我們的新螺栓採用鋁加工而成,可大幅減輕重量,外部有一個 8 毫米六角形,內部有一個 2.5 毫米六角拉刀。

使用用於 M3 螺栓的標準六角螺絲起子或用於 M5 螺母的支撐工具(您已在飛行包中攜帶)快速更改 GoPro 角度。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 框架套件輕型 3D 列印安裝秤

CADDX Vista 隔離

Caddx Vista 系統的一個主要缺點是設備主體接地,這可能導致導電碳纖維板和框架硬體也接地。在理想世界中,這不一定是問題,但在現實世界中,這是一個隨時可能發生的事故。

ImpulseRC Mr-Steel ApexDC 5 吋 FPV 車架套件輕型模切聚酯薄膜絕緣體


除了 Vista 所需的 M2 安裝五金外,我們還包括模切聚酯薄膜絕緣體和由非導電 POM 製成的客製化加工「錐形鉚釘」。

安裝後,Caddx Vista 和 M2 硬體與框架電氣隔離。與使用笨重 3D 列印的其他設計相比,此解決方案僅增加 0.5 克的額外重量。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕質模切聚酯薄膜安裝
ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕質底部 2


DJI 高畫質攝影機隔離

與 Caddx Vista 本身一樣,某些 DJI 高清相機也會使框架接地,從而產生類似的不幸後果。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕型高畫質攝影機板


ApexDC 包含新設計的高清攝影機板和 3D 列印絕緣插件。這可以使相機牢固鎖定到位並減少振動,同時確保其與框架電氣隔離。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕型高畫質攝影機板前視圖


天線安裝

每個套件中都包含一個用於Caddx Vista或其他類似天線的 3D 列印天線支架。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 框架套件輕量 Caddx Vista 天線安裝座
ImpulseRC Mr Steel ApexDC 5 吋 FPV 框架套件輕型 Caddx Vista 天線安裝座 2

此外,Steele 先生版本的套件還包括一個用於 Tracer Immortal-T 天線的支架。

ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕型 Tracer Immortal T 座
ImpulseRC Mr Steel ApexDC 5 吋 FPV 車架套件輕型 Tracer Immortal T 座


APEXDC 套件內容

  • 碳纖維車架部件
  • 硬體和支架
  • Mylar 和 POM Vista 隔離部件
  • Vista 天線安裝座
  • 注塑滑板和保險槓
  • 注塑線蓋
  • 橡膠和魔鬼氈電池墊
  • 鑽石銼刀
  • 電池帶

史蒂爾先生套件額外內容

  • 包括基礎套件中的所有內容以及以下附加功能:
  • GoPro 安裝座和定制螺栓
  • 獵空不朽-T 坐騎
  • 7075-T6 輕量硬體套件
  • Coyote Brown 防滑和保險槓
  • 橡膠 FC 振動支架
  • XT-60尾纖
  • 泡棉條
  • 電池帶

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
JoeE
Good quality

Seems to be good quality fit and finish. appreciate the little extras like the antenna mount, camera mount, landing skids, etc. Works well with Runcam Link and a standard FC/ESC stack (using Zeez 3030, but I think it will fit a 2020). make sure to plan your stack hardware before you put the arms and bottom plate on, as these will cover the stack mounts (so you have to disassemble if you want to use shorter or longer screws or different holes for the stacks).

Didn't come with instructions, but there is a youtube video where Mr. Steele builds one. The video is OK (if a little long for an already experienced builder), but he forgot to install the DJI wiring before mounting and seemed to stumble through a coupe other steps via trail and error..., so the build sequencing could be a little better thought out, and step by step instructions are always preferred.

Haven't got to fly yet, since I found out my ESC is DOA when trying to set everything up (probably my fault as I had a slip while soldering the motor wires and partly melted a surface mounted component or chip, oops!) but hope to fly soon and will update review if it sucks or breaks easily.

m
mark mieleszko
Great Frame got my order quick!

great frame had a little struggle mounting the 03 camera in it but that was expected, only part i wish i had is a little more vertical room in the frame took a little tinkering to get the battery strap thru

相關產品

看更多
DJI Neo 組合
DJI Neo 組合
DJI
$ 289.00
大疆 Neo
大疆 Neo
DJI
$ 199.00
跑攝夜鷹3 V2
$ 69.99